![]() ![]() | ![]() ![]() |
Remote commands | Operation details | ||
91 | Playing Voice messages | After one long beep, the machine plays the ICM. | |
1 Repeat or Skip Backward | Press 1 while listening to an ICM to repeat it. If you press 1 before a message, you will hear the previous message. | ||
2 Skip Forward | Press 2 while playing the ICM, you can skip to the next message. | ||
9 STOP Playing | Press 9 to stop playing the ICM. | ||
93 | Erase all ICM | If you hear one long beep, the erase is accepted. If you hear three short beeps, you cannot erase because all voice messages have not been played, or there are no voice messages to erase. *This code erases all recorded messages, not one at a time. | |
94 | Play and Record OGM in Memory | ||
1 Play | 1 TAD Message | The machine plays the selected OGM. You can stop playing OGMs by pressing 9. | |
2 F/T Message | |||
2 Record | 1 TAD Message | After one long beep, you can record the selected OGM. You will hear the message played once. You can stop recording the message by pressing 9. | |
2 F/T Message | |||
95 | Change the Fax Forwarding or Fax Storage settings | ||
1 OFF | You can choose Off after you have retrieved or erased all your messages. | ||
2 Fax Forwarding | One long beep means the change is accepted. If you hear three short beeps, you cannot change because something has not been set up (for example, a Fax Forwarding number has not been registered). You can register your Fax Forwarding number by entering 4. (See Changing your Fax Forwarding number.) Once you have registered the number, Fax Forwarding will work. | ||
4 Fax Forwarding number | |||
6 Fax Storage | |||
96 | Retrieve a fax | ||
2 Retrieve all faxes | Enter the number of a remote fax machine to receive stored fax messages. (See Retrieving fax messages.) | ||
3 Erase faxes from the memory | If you hear one long beep, fax messages have been erased from the memory. | ||
97 | Check the receiving status | ||
1 Fax | You can check whether your machine has received any faxes or voice messages. If yes, you will hear one long beep. If no, you will hear three short beeps. | ||
2 Voice | |||
98 | Change the Receive Mode | ||
1 TAD | If you hear one long beep, your change has been accepted. | ||
2 Fax/Tel | |||
3 Fax Only | |||
90 | Exit | Pressing 9 0 allows you to exit remote retrieval. Wait for the long beep, then replace the handset. |
![]() ![]() | ![]() ![]() |