Home PrintPrevious Next

Memory Receive (Monochrome only)

You can only use one Memory Receive operation at a time:
•
Fax Forwarding
•
Fax Storage
•
PC Fax Receive
•
Off
You can change your selection at any time. If received faxes are still in the machine’s memory when you change the Memory Receive operation, a message will appear on the LCD. (See Changing Memory Receive Operations.)

Fax Forward

When you choose Fax Forward, your machine stores the received fax in the memory. The machine will then dial the fax number you have programmed and forward the fax message.
1
Press MENU.
2
Press Bsymbol.utri or Bsymbol.dtri to display Fax.
3
Press Fax.
4
Press Bsymbol.utri or Bsymbol.dtri to display Setup Receive.
5
Press Setup Receive.
6
Press Bsymbol.utri or Bsymbol.dtri to display Memory Receive.
7
Press Memory Receive.
8
Press Fax Forward.
9
Enter the forwarding number (up to 20 digits) using the buttons on the LCD.
Press OK.
10
Press Backup Print:On or Backup Print:Off.
CAUTION IMPORTANT
•
If you choose Backup Print:On, the machine will also print the fax so you will have a copy. This is a safety feature in case there is a power failure before the fax is forwarded or a problem at the receiving machine. Backup Print:On feature does not work if Fax Preview is on.
•
The machine can store faxes for approximately 24 hours if there is a power failure.
11
Press Stop/Exit.
Page Top
Home PrintPrevious Next