Home PrintPrevious Next

How to preview an outgoing fax (Monochrome only)

You can preview a fax message before you send it. You must set the Real Time Transmission and Polling RX to off before you use this feature.
Note Note
To send a colour fax do not use Preview.
1
Press Graphic (Fax).
2
Press Bsymbol.ltri or Bsymbol.rtri to display Preview.
3
Press Preview.
4
Press On.
5
Load the document.
6
Enter the fax number using the dial pad.
You can also enter the fax number by pressing Speed Dial. Then, press Bsymbol.utri or Bsymbol.dtri to display the number you want, press the number to choose it, and then press Send a fax.
7
Press Mono Start.
The machine starts scanning the document and the outgoing fax appears on the LCD.
When the fax is displayed, press MENU. The buttons will appear on the LCD and perform the operations shown below:
Button
Description
Graphic
Enlarge the fax.
Graphic
Reduce the fax.
Graphic or Graphic
Scroll vertically.
Graphic or Graphic
Scroll horizontally.
Graphic
Rotate the fax clockwise.
Graphic
Go back to the previous page.
Graphic
Go to the next page.
Graphic
Close the preview table.
8
Press Mono Start.
Note Note
The fax message in the memory will be sent and then erased when you press Mono Start.
Page Top
Home PrintPrevious Next