Home PrintPrevious Next

Loading documents

You can send a fax, make copies, and scan from the ADF (automatic document feeder) and from the scanner glass.

Using the ADF

The ADF can hold up to 15 pages and feeds each sheet individually. Use standard 80 g/m2 paper and always fan the pages before putting them in the ADF.

Recommended environment

Temperature:
20 °C to 30 °C
Humidity:
50% to 70%
Paper:
80 g/m2
Page Top

Document Sizes Supported

Length:
148 to 355.6 mm
Width:
148 to 215.9 mm
Weight:
64 to 90 g/m2
Page Top

How to load documents

CAUTION IMPORTANT
•
DO NOT pull on the document while it is feeding.
•
DO NOT use paper that is curled, wrinkled, folded, ripped, stapled, paper clipped, pasted or taped.
•
DO NOT use cardboard, newspaper or fabric.
Make sure documents written with ink are completely dry.
1
Unfold the ADF Document Output Support Flap (1).
2
Fan the pages well.
3
Adjust the paper guides to fit the width of your documents.
4
Make sure you place your document, face down, top edge first in the ADF underneath the guides (2) until you feel it touch the feed rollers and the LCD screen shows ADF Ready.
Graphic
CAUTION IMPORTANT
DO NOT leave thick documents on the scanner glass. If you do this, the ADF may jam.
Page Top
Home PrintPrevious Next