You can change the copy settings temporarily for the next multiple copies.
The machine returns to its default settings after 1 minute, or if the Mode Timer returns the machine to Fax mode. (See
Mode Timer.)
If you have finished choosing settings, press Mono Start or Colour Start.
If you want to choose more settings, press
or
.
Note
| | You can save some of the settings that you use most often by setting them as a favourite (up to three favourites can be saved). These settings will stay until you change them again. (See Setting your favourites.) |
Changing copy speed and quality
You can choose from a range of speed and quality. The factory setting is Normal.
| • | Fast Fast copy speed and lowest amount of ink used. Use to save time printing documents to be proof-read, large documents or many copies. Even if you set this option the copy speed will be slower with Ink Save Mode, Book Copy or Watermark Copy turned on. |
| • | Normal Normal is the recommended mode for ordinary print outs. This produces good copy quality with good copy speed. |
| • | Best Use best mode to copy precise images such as photographs. This provides the highest resolution and slowest speed. |
| 1 | Press  ( Copy). |
| 2 | Load your document. |
| 3 | Enter the number of copies you want. |
| 4 | Press or to display Quality. |
| 5 | Press Quality. |
| 6 | Press Fast, Normal or Best. |
| 7 | If you do not want to change additional settings, press Mono Start or Colour Start. |
