Uninstalling and installing the handset and handset cradle
If you do not use the handset you can remove the handset and handset cradle.
Uninstalling the handset and handset cradle
1
Unplug the curled handset cord from the machine.
2
Pull the tab
(1)
back and hold it in position as you push the cradle
(2)
to the back of the machine.
3
Attach the side cover.
Page Top
Installing the handset and handset cradle
1
Remove the side cover.
Note
If you cannot open the cover with your hand, use a coin to open it.
2
Align the recessed arrows on the cradle with those on the machine, and then slide the cradle toward the front of the machine until it clicks into place.
3
Connect the curled handset cord to the machine.
Page Top