Documents can jam in the ADF unit if they are not inserted or fed properly, or if they are too long. Follow the steps below to clear a document jam.
Document is jammed in the top of the ADF unit
1 | Take out any paper from the ADF that is not jammed. |
2 | Open the ADF cover. |
3 | Pull the jammed document up and to the left. |
4 | Close the ADF cover. |
5 | Press Stop/Exit. |
IMPORTANT
| To avoid future document jams close the ADF cover correctly by pushing it gently in the middle. |
Document is jammed inside the ADF unit
1 | Take out any paper from the ADF that is not jammed. |
2 | Lift the document cover. |
3 | Pull the jammed document out to the left. |
4 | Close the document cover. |
5 | Press Stop/Exit. |