If you are having problems sending or receiving a fax due to possible interference on the telephone line, you can change the compatibility setting, which reduces the modem speed to minimise errors.
1 | Press MENU. |
2 | Press or to display Initial Setup. |
3 | Press Initial Setup. |
4 | Press or to display Compatibility. |
5 | Press Compatibility. |
6 | Press High, Normal or Basic(for VoIP). • | Basic(for VoIP) cuts the modem speed to 9,600 bps. Unless interference is a recurring problem on your telephone line, you may prefer to use it only when needed. | • | Normal sets the modem speed at 14,400 bps. | • | High increases the modem speed to 33,600 bps. (factory setting) |
|
7 | Press Stop/Exit. |
Note
| When you change the compatibility to Basic(for VoIP), the ECM feature is only available for colour fax sending. |