Function table and default factory settings

The factory settings are shown in Bold with an asterisk.

Main Menu	Submenu	Menu Selections		Options	Page
5.LAN	1.Wired	1.TCP/IP	1.BOOT Method	Auto* Static RARP BOOTP DHCP (If you choose Auto, RARP, BOOTP or DHCP, you will be asked to enter how many times the machine tries to obtain the IP address.)	BOOT Method
			2.IP Address	[000-255].[000-255]. [000-255].[000-255] [000].[000].[000].[000]*¹	IP Address
			3.Subnet Mask	[000-255].[000-255]. [000-255].[000-255] [000].[000].[000].[000]*¹	Subnet Mask
			4.Gateway	[000-255].[000-255]. [000-255].[000-255] [000].[000].[000].[000]*	Gateway
			5.Node Name	BRNxxxxxxxxxxxx (up to 15 characters)	Node Name
			6.WINS Config	Auto* Static	WINS Config
			7.WINS Server	(Primary) [000-255].[000-255]. [000-255].[000-255] [000].[000].[000].[000]* (Secondary) [000-255].[000-255]. [000-255].[000-255] [000].[000].[000].[000]*	WINS Server
5.LAN (continued)	1.Wired (continued)	1.TCP/IP (continued)	8.DNS Server	(Primary) [000-255].[000-255]. [000-255].[000-255] [000].[000].[000].[000]* (Secondary) [000-255].[000-255]. [000-255].[000-255] [000].[000].[000].[000]*	DNS Server
			9.APIPA	On* Off	APIPA
			0.IPv6	On Off*	IPv6
		2.Ethernet	-	Auto* 100B-FD 100B-HD 10B-FD 10B-HD	Ethernet (wired network only)
		3.Set to Default	1.Reset	-	Set to Default
			2.Exit	-	Set to Default
		4.Wired Enable	-	On* Off	Wired Enable (wired network only)
	2.WLAN	1.TCP/IP	1.BOOT Method	Auto* Static RARP BOOTP DHCP (If you choose Auto, RARP, BOOTP or DHCP, you will be asked to enter how many times the machine tries to obtain the IP address.)	BOOT Method
			2.IP Address	[000-255].[000-255]. [000-255].[000-255] [000].[000].[000].[000]*¹	IP Address
			3.Subnet Mask	[000-255].[000-255]. [000-255].[000-255] [000].[000].[000].[000]*¹	Subnet Mask
5.LAN (continued)	2.WLAN (continued)	1.TCP/IP (continued)	4.Gateway	[000-255].[000-255]. [000-255].[000-255] [000].[000].[000].[000]*	Gateway
			5.Node Name	BRWxxxxxxxxxxxx (up to 15 characters)	Node Name
			6.WINS Config	Auto* Static	Ethernet (wired network only)
			7.WINS Server	(Primary) [000-255].[000-255]. [000-255].[000-255] [000].[000].[000].[000]* (Secondary) [000-255].[000-255]. [000-255].[000-255] [000].[000].[000].[000]*	WINS Server
			8.DNS Server	(Primary) [000-255].[000-255]. [000-255].[000-255] [000].[000].[000].[000]* (Secondary) [000-255].[000-255]. [000-255].[000-255] [000].[000].[000].[000]*	DNS Server
			9.APIPA	On* Off	APIPA
			0.IPv6	On Off*	IPv6
		2.Setup Wizard	-	-	Setup Wizard (wireless network only)
		3.SES/WPS /AOSS	-	-	SES/WPS/AOSS (wireless network only)
		4.WPS w/PIN code	-	-	WPS w/PIN code (wireless network only)
5.LAN (continued)	2.WLAN (continued)	5.WLAN Status	1.Status	Active(11b) Active(11g) Wired LAN Active WLAN OFF AOSS Active Connection NG or Connection error	WLAN Status (wireless network only)
			2.Signal	Strong Medium Weak None	Signal
			3.SSID	-	SSID
			4.Comm. Mode	Ad-hoc Infrastructure	Comm.Mode
		6.Set to Default	1.Reset	-	Set to Default
			2.Exit	-	Set to Default
		7.WLAN Enable	-	On Off*	WLAN Enable (wireless network only)
	3.Scan to FTP	-	Color 150 dpi* Color 300 dpi Color 600 dpi Gray 100 dpi Gray 200 dpi Gray 300 dpi B&W 200 dpi B&W 200x100 dpi	(If you chose Color option) PDF* JPEG (If you chose Gray option) PDF JPEG* (If you chose B&W option) PDF* TIFF	Scan to FTP
	0.Factory Reset	1.Reset	-	1.Yes 2.No	Restoring the network settings to factory default
	0.Factory Reset	2.Exit	-	-	Restoring the network settings to factory default

¹	On connection to the network, the machine will automatically set the IP address and Subnet Mask to values appropriate for your network.

Page Top