Search

Home > Machine Settings > Change Machine Settings Using Web Based Management > Set Up Your Machine's Address Book Using Web Based Management

Set Up Your Machine's Address Book Using Web Based Management

  • We recommend using the HTTPS security protocol when configuring settings using Web Based Management.

  • When you use HTTPS for Web Based Management configuration, your browser will display a warning dialog box.

  1. Start your web browser.
  2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is your machine's IP address).
    For example:

    https://192.168.1.2

    image
    • If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such as "SharedPrinter" instead of the IP address.

      For example: https://SharedPrinter

    • If you enable a NetBIOS name, you can also use the node name.

      For example: https://brn123456abcdef

    • The NetBIOS name can be found in the Network Configuration Report.
  3. If required, type the password in the Login field, and then click Login.
    image
    The default password to manage this machine’s settings is located on the back of the machine and marked "Pwd".
  4. Go to the navigation menu, and then click Address Book.
    image
    Start from image, if the navigation menu is not shown on the left side of the screen.
  5. Click the target address numbers, and then add or update the Address Book information as needed.
  6. Click Submit.
Did you find the information you needed?