This key is used to have a telephone conversation after picking up the external handset in F/T pseudo-ringing.
Also, use this key to gain access to an outside line, or transfer a call to another extension when it is connected to a PBX.
•
Redial/Pause
Redials the last number called. It also inserts a pause when programming a quick dial numbers.
•
Resolution
Lets you temporarily change the resolution when sending a fax.
2.
Copy keys (Temporary settings):
•
Options
Lets you temporarily change multiple copy settings when in copy mode.
•
Quality
Lets you temporarily change the quality setting.
•
Enlarge/Reduce
Lets you temporarily enlarge or reduce copies depending on the ratio you choose.
•
Paper Type
Lets you choose which type of paper you want to use for the next copy.
3.
Dial Pad
Use these keys to dial telephone and fax numbers and as a keyboard for entering information into the machine.
The # key lets you temporarily switch the dialling mode during a telephone call from Pulse to Tone.
4.
Mode keys:
•
Fax
Lets you access Fax mode.
•
Scan
Lets you access Scan mode.
•
Copy
Lets you access Copy mode.
•
PhotoCapture
Lets you access PhotoCapture Center™ mode.
5.
Menu keys:
•
Menu
Lets you access the main menu.
•
Search/Speed Dial
Lets you look up and dial numbers that are stored in the memory.
•
Volume keys
In Fax mode, you can press these keys to adjust the ring volume.
•
Press to scroll backward to a menu selection.
•
or
Press to scroll through the menus and options.
•
Clear/Back
Press to cancel the current setting.
•
OK
Lets you choose a setting.
6.
Start keys:
•
Colour Start
Lets you start sending faxes or making copies in full colour. Also lets you start a scanning operation (in colour or mono, depending on the scanning setting in the ControlCenter software).
•
Mono Start
Lets you start sending faxes or making copies in monochrome. Also lets you start a scanning operation (in colour or mono, depending on the scanning setting in the ControlCenter software).
7.
Power Save
Lets you put the machine into Power Save mode.
8.
Stop/Exit
Stops an operation or exits from a menu.
9.
LCD (liquid crystal display)
Displays messages on the screen to help you set up and use your machine.
10.
Ink Management
Lets you clean the print head, check the print quality, and check the available ink volume.
