This menu has nine sections: Boot Method, IP Address, Subnet Mask, Gateway, Node Name, WINS Config, WINS Server, DNS Server and APIPA.
IP Address
| (For Monochrome Display models) |
| 1 | Press Menu, 5, 1, 2. |
| 2 | Select 1 to change. Enter the IP address. |
| 3 | Press OK. |
| 4 | Press Stop/Exit. |
| (For Colour Display models) |
| 1 | Press Menu. |
| 2 | Press  or  to select LAN. Press OK. |
| 3 | Press or to select TCP/IP. Press OK. |
| 4 | Press or to select IP Address. Press OK. |
| 5 | Press or to select Change. Press OK. |
| 6 | Enter the IP address. Press OK.  Note | | For DCP models, press or repeatedly to enter the first three-digit number for the IP address. Press  to enter the second three-digit number. Repeat this step until you have entered the fourth three-digit number to complete the IP address. Press OK. |
|
| 7 | Press Stop/Exit. |
Subnet Mask
| (For Monochrome Display models) |
| 1 | Press Menu, 5, 1, 3. |
| 2 | Select 1 to change. Enter the Subnet Mask address. |
| 3 | Press OK. |
| 4 | Press Stop/Exit. |
| (For Colour Display models) |
| 1 | Press Menu. |
| 2 | Press or to select LAN. Press OK. |
| 3 | Press or to select TCP/IP. Press OK. |
| 4 | Press or to select Subnet Mask. Press OK. |
| 5 | Press or to select Change. Press OK. |
| 6 | Enter the Subnet Mask address. Press OK. Note | | For DCP models, press or repeatedly to enter the first three-digit number for the Subnet Mask. Press to enter the second three-digit number. Repeast this step until you have entered the fourth three-digit number to complete the Subnet Mask. Press OK. |
|
| 7 | Press Stop/Exit. |
Gateway
| (For Monochrome Display models) |
| 1 | Press Menu, 5, 1, 4. |
| 2 | Select 1 to change. Enter the Gateway address. |
| 3 | Press OK. |
| 4 | Press Stop/Exit. |
| (For Colour Display models) |
| 1 | Press Menu. |
| 2 | Press or to select LAN. Press OK. |
| 3 | Press or to select TCP/IP. Press OK. |
| 4 | Press or to select Gateway. Press OK. |
| 5 | Press or to select Change. Press OK. |
| 6 | Enter the Gateway address. Press OK. Note | | For DCP models, press or repeatedly to enter the first three-digit number for the Gateway address. Press to enter the second three-digit number. Repeat this step until you have entered the fourth three-digit number to complete the Gateway address. Press OK. |
|
| 7 | Press Stop/Exit. |
