Home PrintPrevious Next

Function Table and Default Factory Settings

(For Monochrome Display models)
Level1
Level2
Level3
Options
5.LAN
1.Setup TCP/IP
1.BOOT Method
Auto/Static/RARP/BOOTP/DHCP
 
2.IP Address
[169].[254].[001-254].[000-255]1
 
3.Subnet Mask
[255].[255].[000].[000]1
 
4.Gateway
[000].[000].[000].[000]
 
5.Node Name
BRN_XXXXXX= (last 6 figures of Ethernet address)
(up to 15 characters)
 
6.WINS Config
Auto/Static
 
7.WINS Server
(Primary)
[000].[000].[000].[000]
(Secondary)
[000].[000].[000].[000]
 
8.DNS Server
(Primary)
[000].[000].[000].[000]
(Secondary)
[000].[000].[000].[000]
 
9.APIPA
On/Off
 
2.Setup Misc.
1.Ethernet
Auto/100B-FD/100B-HD/10B-FD/10B-HD
 
0.Factory Reset
 
 
1
On connection to the network, if the machine's BOOT Method is Auto the machine will attempt to automatically set the IP address and Subnet Mask from a boot server such as DHCP or BOOTP. If a boot server can not be found, an APIPA IP address will be allocated, such as 169.254.[001-254].[000-255]. If the BOOT Method of the machine is set to Static you will need to manually enter an IP address from the machine's control panel.
(For Colour Display models)
Level1
Level2
Level3
Options
LAN
TCP/IP
BOOT Method
Auto/Static/RARP/BOOTP/DHCP
 
IP Address
[169].[254].[001-254].[000-255]1
 
Subnet Mask
[255].[255].[000].[000]1
 
Gateway
[000].[000].[000].[000]
 
Node Name
BRN_XXXXXX= (last 6 figures of Ethernet address)
(up to 15 characters)
 
WINS Config
Auto/Static
 
WINS Server
(Primary)
[000].[000].[000].[000]
(Secondary)
[000].[000].[000].[000]
 
DNS Server
(Primary)
[000].[000].[000].[000]
(Secondary)
[000].[000].[000].[000]
 
APIPA
On/Off
 
Setup Misc.
Ethernet
Auto/100B-FD/100B-HD/10B-FD/10B-HD
 
Factory Reset
 
 
1
On connection to the network, if the machine's BOOT Method is Auto the machine will attempt to automatically set the IP address and Subnet Mask from a boot server such as DHCP or BOOTP. If a boot server can not be found, an APIPA IP address will be allocated, such as 169.254.[001-254].[000-255]. If the BOOT Method of the machine is set to Static you will need to manually enter an IP address from the machine's control panel.
Page Top
Home PrintPrevious Next