| 1. | Read all of these instructions. |
| 2. | Save them for later reference. |
| 3. | Follow all warnings and instructions marked on the product. |
| 4. | Unplug this product from the wall outlet before cleaning the outside of the machine and the scanner glass. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. |
| 5. | The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom’s network services. |
| 6. | This equipment does not fully meet Telecom’s impedance requirements. Performance limitations may occur when used in conjunction with some parts of the network. Telecom will accept no responsibility should difficulties arise in such circumstances. |
| 7. | If a charge for local calls is acceptable, the “Dial Button” should not be used for local calls. Only the 7-digits of the local number should be dialled from your telephone. Do not dial the area code digit or the “0” prefix. |
| 8. | This equipment shall not be set to make automatic calls to the Telecom ‘111’ Emergency Service. |
| 9. | This equipment should not be used under any circumstances which may constitute a nuisance to other Telecom customers. |
| 10. | Not all telephones will respond to incoming ringing when connected to the extension socket. |
| 11. | The answer delay setting of this equipment shall not be set to less than the default setting as this will destroy Caller ID information. |
| 12. | All persons using this device for recording telephone conversations shall comply with New Zealand law. This requires that at least one party to the conversation is to be aware that it is being recorded. In addition, the Principles enumerated in the Privacy Act 1993 shall be complied with in respect to the nature of the personal information collected, the purpose for its collection, how it is to be used and what it disclosed to any other party. |
| 13. | Do not place this product on an unstable surface, stand, or table. The product may fall, causing serious damage to the product. |
| 14. | Slots and openings in the casing and the back or bottom are provided for ventilation; to ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heater. This product should not be placed in a built-in installation unless proper ventilation is provided. |
| 15. | This product should be connected to an AC power source within the range indicated on the rating label. Do NOT connect it to a DC power source. If you are not sure, contact a qualified electrician. |
| 16. | This product is equipped with a 3-wire earthed plug. This plug will fit into only an earthed socket. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete socket. Do not defeat the purpose of an earthed plug. |
| 17. | Do not place anything on top of the power cord including this machine. Do not allow the power cord to be stepped on. |
| 18. | Do not place anything in front of the machine that will block received faxes. Do not place anything in the path of received faxes. |
| 19. | Do not touch a document during printing. |
| 20. | Never push objects of any kind into this product through cabinet slots, since they may touch dangerous voltage points or short out parts resulting in a risk of fire or electric shock. Never spill liquid of any kind on the product. |
| 21. | Do not attempt to service this product yourself, because opening or removing covers may expose you to dangerous voltage points and/or other risks. Refer all servicing to service personnel. |
| 22. | Unplug this product from the mains power and telephone line sockets, and refer servicing to qualified Service Personnel under the following conditions: | • | If the power cord is damaged or frayed. | | • | If liquid has been spilled into the product. | | • | If the product has been exposed to rain or water. | | • | If the product does not operate normally when the operating instructions are followed. Adjust only those controls that are covered by the operating instructions. Incorrect adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation. | | • | If the product has been dropped or the casing has been damaged. | | • | If the product exhibits a distinct change in performance, indicating a need for service. |
|
| 23. | This unit will only work in conjunction with a tone signalling (DTMF) telephone, but some telephones are not compatible. Since noise or speech from the telephone can upset dialling from this unit, errors may result if the devices are used together in other than quiet conditions. |
| 24. | Where it is necessary to dial prefix digits, such as a Caller Display override code (“0196” or “0197”), this unit will have to be used in conjunction with an associated tone signalling (DTMF) telephone. |
| 25. | Note that some telephones are not compatible with this unit and dialling errors may result if the two devices are used together in other than quiet conditions. The Telecom Faults Service is not to be called should such problems arise. In such cases, it is recommended that the prefix and wanted number are dialled manually. |
| 26. | This equipment may not provide for the effective hand-over of a call to another device connected to the same line. |
