| | |
), the system will give two short beeps and you must enter a remote command.Remote commands | Operation details | ||
91 | Playing Voice messages (FAX-1960C) | After one long beep, the machine plays the ICMs. | |
1 Repeat or Skip Backward | Press 1 while listening to an ICM to repeat it. If you press 1 before a message, you will hear the previous message. | ||
2 Skip Forward | While playing the ICM, you can skip to the next message. | ||
9 STOP Playing | Stop Playing the ICM. | ||
93 | Erase all ICM (FAX-1960C) | If you hear one long beep, the erase is accepted. If you hear three short beeps, you cannot erase the ICMs because all voice messages have not been played or there are no voice messages to erase. *This code erases all recorded messages, not one at a time. | |
94 | Play and Record OGM in Memory (FAX-1960C) | ||
1 Play | 1 Msg Ctr OGM | The machine plays the selected OGM. You can stop playing OGMs by pressing 9. | |
2 F/T OGM | |||
2 Record | 1 Msg Ctr OGM | After one long beep, you can record the selected OGM. You will hear the message played once. You can stop recording the message by pressing 9. | |
2 F/T OGM | |||
95 | Change the Fax Forwarding, Paging or Fax Storage settings | ||
1 OFF | You can choose Off after you have retrieved or erased all your messages. | ||
2 Fax Forwarding | If you hear one long beep, the change has been accepted. If you hear three short beeps, you cannot change it because something has not been set up (for example, registering a Fax Forwarding number). You can register your Fax Forwarding number by entering 4. (See Changing your Fax Forwarding number.) | ||
3 Paging | |||
4 Fax Forwarding number | |||
6 Fax Storage | |||
96 | Retrieve a fax | ||
2 Retrieve all faxes | Enter the number of a remote fax machine to receive stored fax messages. (See Retrieving fax messages.) | ||
3 Erase faxes from the memory | If you hear one long beep, fax messages have been erased from the memory. | ||
97 | Check the receiving status (MFC-3360C and FAX-1860C) | ||
1 Fax | You can check whether your machine has received any faxes. If yes, you will hear one long beep. If no, you will hear three short beeps. | ||
97 | Check the receiving status (FAX-1960C only) | ||
1 Fax | You can check whether your machine has received any fax or voice messages. If yes, you will hear one long beep. If no, you will hear three short beeps. | ||
2 Voice | |||
98 | Change the Receive Mode (MFC-3360C and FAX-1860C) | ||
1 External TAD | If you hear one long beep, your change has been accepted. | ||
2 Fax/Tel | |||
3 Fax Only | |||
98 | Change the Receive Mode (FAX-1960C) | ||
1 Msg Ctr | If you hear one long beep, your change has been accepted. | ||
2 Fax/Tel | |||
3 Fax Only | |||
90 | Exit | Pressing 9 0 will allow you to exit Remote Retrieval. Wait for the long beep, then replace the handset. | |
| | |