![]() ![]() | ![]() ![]() |
Remote commands | Operation details | ||
95 | Change the Fax Forwarding or Fax Storage settings | ||
1 OFF | You can choose Off after you have retrieved or erased all your messages. | ||
2 Fax Forwarding | If you hear one long beep, the change has been accepted. If you hear three short beeps, you cannot change it because something has not been set up (for example, registering a Fax Forwarding number). You can register your Fax Forwarding number by entering 4. (See Changing your Fax Forwarding number.) | ||
4 Fax Forwarding number | |||
6 Fax Storage | |||
96 | Retrieve a fax | ||
2 Retrieve all faxes | Enter the number of a remote fax machine to receive stored fax messages. (See Retrieving fax messages.) | ||
3 Erase faxes from the memory | If you hear one long beep, fax messages have been erased from the memory. | ||
97 | Check the receiving status | ||
1 Document | You can check whether your machine has received any faxes. If yes, you will hear one long beep. If no, you will hear three short beeps. | ||
98 | Change the Receive Mode | ||
1 External TAD | If you hear one long beep, your change has been accepted. | ||
2 Fax/Tel | |||
3 Fax Only | |||
90 | Exit | Pressing 9 0 will allow you to exit Remote Retrieval. Wait for the long beep, then replace the handset. |
![]() ![]() | ![]() ![]() |