Dial your fax number from a telephone or another fax machine using touch tone.
2
When your machine answers, enter your remote access code (3 digits followed by ).
3
The machine signals if it has received messages:
•
1 long beep — Fax messages
•
No beeps — No messages
4
When the machine gives two short beeps, enter a command.
The machine will hang up if you wait longer than 30 seconds to enter a command.
The machine will beep three times if you enter an invalid command.
5
Press 90 to stop Remote Access when you have finished.
6
Hang up.
Note
If your machine is set to Manual mode and you want to use the remote retrieval features, wait about 2 minutes after it starts ringing, and then enter the remote access code within 30 seconds.
Note