Pull the paper tray completely out of the machine.

If the paper support flap (1) is open, close it. Open the output paper tray cover (2).

If you are using Letter, A4 or Legal size paper, press and hold the universal guide release button (1) as you slide out the front of the paper tray to match the paper size you are using.

Press and slide the paper side guides (1) and paper length guide (2) to fit the paper size.

Fan the stack of paper well to avoid paper jams and misfeeds.

Gently put the paper into the paper tray print side down and top edge first.

Check that the paper is flat in the tray.

Gently adjust the paper side guides with both hands and the paper length guide to fit the paper.

Make sure that the paper guides touch the edges of the paper.

Close the output paper tray cover (1) and slide it forward.

Slowly push the paper tray completely into the machine.

While holding the paper tray in place, pull out the paper support (1) until it clicks and unfold the paper support flap (2).