Loading paper, envelopes and other media

Pull the paper tray completely out of the machine.

If the paper support flap is open, close it and lift the output paper tray cover (1).

Press and slide the paper side guides (1) and paper length guide (2) to fit the paper size.

Fan the stack of paper well to avoid paper jams and misfeeds.

Note

Always make sure the paper is not curled.

Gently put the paper into the paper tray print side down and top edge first.

Check that the paper is flat in the tray.

Note

When you use Legal size paper, press and hold the universal guide release button as you slide out the front of the paper tray.

Gently adjust the paper side guides with both hands and the paper length guide to the paper.

Make sure the paper side guides touch the sides of the paper.

Note

Be careful that you do not push the paper in too far; it may lift at the back of the tray and cause feed problems.

Put the paper tray cover back down.

Slowly push the paper tray completely into the machine.

While holding the paper tray in place, pull out the paper support (1) until it clicks and unfold the paper support flap (2).

Note

Do not use the paper support flap for Legal paper.