Home > Security > Use Secure Function Lock 3.0 > Configure Secure Function Lock 3.0 Using Web Based Management
Configure Secure Function Lock 3.0 Using Web Based Management
- Start your web browser.
- Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
For example:
https://192.168.1.2
- If required, type the password in the Login field, and then click Login.The default password to manage this machine’s settings is located on the back of the machine and marked "Pwd".
- Go to the navigation menu, and then click Administrator > Restriction Management or User Restriction Function.Start from
, if the navigation menu is not shown on the left side of the screen.
- Select Secure Function Lock.
- Click Submit.
- Click the Restricted Functions menu.
- In the User List / Restricted Functions field, type a group name or user name.
- In the Print and the other columns, select a checkbox to allow or clear a checkbox to restrict the function listed.
- To configure the maximum page count, select the On checkbox in the Page Limits column, and then type the maximum number in the Max. Pages field.
- Click Submit.
- Click the User List menu.
- In the User List field, type the user name.
- In the Password field, type a password.The number of characters you can set differs depending on the model.
- Select User List / Restricted Functions from the drop-down list for each user.
- Click Submit.
![image](../images/topic1_icon5.png)
You can also change the user list lockout settings in the Secure Function Lock menu.
Did you find the information you needed?