Home PrintPrevious Next

Function table and default factory settings

For MFC-5490CN
Level1
Level2
Level3
Options
5.Network
1.Setup TCP/IP
1.BOOT Method
Auto/Static/RARP/BOOTP/DHCP
2.IP Address
[000-255].[000-255].[000-255].[000-255].
[000].[000].[000].[000]1
3.Subnet Mask
[000-255].[000-255].[000-255].[000-255].
[000].[000].[000].[000]1
4.Gateway
[000-255].[000-255].[000-255].[000-255].
[000].[000].[000].[000]
5.Node Name
BRNxxxxxxxxxxxxx= (your machine’s Ethernet address)
(up to 15 characters)
6.WINS Config
Auto/Static
7.WINS Server
Primary/Secondary
[000-255].[000-255].[000-255].[000-255].
[000].[000].[000].[000]
8.DNS Server
Primary/Secondary
[000-255].[000-255].[000-255].[000-255].
[000].[000].[000].[000]
9.APIPA
On/Off
0.IPv6
On/Off
2.Setup Misc.
1.Ethernet
Auto/100B-FD/100B-HD/10B-FD/10B-HD
0.Factory Reset
For other machines
Level1
Level2
Level3
Options1
Options2
Network
Wired LAN
TCP/IP
BOOT Method
Auto/Static/RARP/BOOTP/DHCP
IP Address
[000-255].[000-255].
[000-255].[000-255].
[000].[000].[000].[000] 1
Subnet Mask
[000-255].[000-255].
[000-255].[000-255].
[000].[000].[000].[000] 1
Gateway
[000-255].[000-255].
[000-255].[000-255].
[000].[000].[000].[000]
Node Name
BRNXXXXXXXXXXXX= (your Ethernet address)
(up to 15 characters)
BRNXXXXXXXXXXXX*
WINS Config
Auto/Static
WINS Server
Primary/Secondary
[000-255].[000-255].
[000-255].[000-255].
[000].[000].[000].[000]
DNS Server
Primary/Secondary
[000-255].[000-255].
[000-255].[000-255].
[000].[000].[000].[000]
APIPA
On/Off
IPv6
(MFC-5890CN, MFC-5895CW, MFC-6490CW, DCP-6690CW and MFC-6890CDW only)
On/Off
Ethernet
Auto/100B-FD/100B-HD/10B-FD/10B-HD
WLAN
TCP/IP
BOOT Method
Auto/Static/RARP/BOOTP/DHCP
IP Address
[000-255].[000-255].
[000-255].[000-255].
[000].[000].[000].[000] 1
Subnet Mask
[000-255].[000-255].
[000-255].[000-255].
[000].[000].[000].[000] 1
Gateway
[000-255].[000-255].
[000-255].[000-255].
[000].[000].[000].[000]
Node Name
BRWXXXXXXXXXXXX= (your Ethernet address)
(up to 15 characters)
BRWXXXXXXXXXXXX*
WINS Config
Auto/Static
WINS Server
Primary/Secondary
[000-255].[000-255].
[000-255].[000-255].
[000].[000].[000].[000]
DNS Server
Primary/Secondary
[000-255].[000-255].
[000-255].[000-255].
[000].[000].[000].[000]
APIPA
On/Off
IPv6
(MFC-5890CN, MFC-5895CW, MFC-6490CW, DCP-6690CW and MFC-6890CDW only)
On/Off
Setup Wizard
—
(Choose SSID from list or manually add SSID)
SES/WPS/AOSS
(Not available for MFC-5895CW)
—
WPS/AOSS
(MFC-5895CW only)
—
WPS w/PIN Code
—
WLAN Status
Status
Active(11b)/Active(11g)/
Connection Failed
Signal
Strong/Medium/Weak/None
SSID
(Shows SSID with up to 32 digits)
Comm. Mode
Ad-hoc/Infrastructure
E-mail/IFAX
(MFC-6490CW and MFC-6890CDW only)
Mail Address
—
Setup Server
SMTP Server
Name
(Up to 30 characters)
IP Address
[000-255].[000-255].
[000-255].[000-255].
SMTP Port
[0001-65535]
Auth. for SMTP
None/SMTP-AUTH/POP bef.SMTP
POP3 Server
Name
(Up to 30 characters)
IP Address
[000-255].[000-255].
[000-255].[000-255].
POP3 Port
[00001-65535]
Mailbox Name
—
Mailbox Pwd
—
APOP
On/Off
Setup Mail RX
Auto Polling
On/Off
Poll Frequency
(MFC-6490CW only)
10 Min(s)
Header
All/Subject+From+To/None
Del Error Mail
On/Off
Notification
On/MDN/Off
Setup Mail TX
Sender Subject
—
Size Limit
On/Off
Notification
On/Off
Setup Relay
Rly Broadcast
On/Off
Relay Domain
Relayxx
Relay Report
On/Off
Scan to FTP
(MFC-5890CN, MFC-5895CW, MFC-6490CW and MFC-6890CDW only)
Passive Mode
On/Off
Port Number
21
[00001-65535]
File Name1
—
(Up to 15 characters)
File Name2
—
(Up to 15 characters)
Setup Profile
Not Registered
(Up to 30 characters)
Not Registered
(Up to 30 characters)
Not Registered
(Up to 30 characters)
Not Registered
(Up to 30 characters)
Not Registered
(Up to 30 characters)
Time Zone
UTC xxxx:xx
Network I/F
Wired LAN/WLAN
LDAP2
(MFC-6890CDW only)
On/Off
Factory Reset
Yes/No
•
The factory settings are shown in bold.
1
On connection to the network, the machine will automatically set the IP address and Subnet Mask to value appropriate for your network.
2
The LDAP protocol is not supported for China.
Page Top
Home PrintPrevious Next