Installation when using a Network Print Queue or Share (printer driver only)

Note

•	You must configure the IP address on your machine before you proceed with this section. If you have not configured the IP address, see Configuring your machine for a network with an Ethernet cable connection first.
•	Verify the host computer and print server are either on the same subnet, or that the router is properly configured to pass data between the two devices.
•	If you are using Windows^® Firewall or a firewall function of anti-spyware or antivirus applications, temporarily disable them. Once you are sure that you can print, configure the software settings following the instructions again.

Start the CD-ROM installation menu program according to the Quick Setup Guide.

Choose the model name and your language (if necessary), and then click Initial Installation or Advanced.

Click Printer Driver (Only).

Click Next in response to the Welcome message. Follow the on-screen instructions.

Choose Standard Installation and click Next.

Choose Network Shared Printer, and then click Next.

Choose your printer’s queue, and then click OK.

Note

Contact your administrator if you are not sure about the location and name of the printer on the network.

Click Finish.