Setting the Telephone Line Type

If you are connecting the machine to a line that features PBX or ISDN to send and receive faxes, it is also necessary to change the Telephone Line Type accordingly by completing the following steps.

1	Press Menu.
2	Press or to choose Initial Setup. Press OK.
3	Press or to choose Phone Line Set.
4	Press or to choose PBX, ISDN (or Normal). Press OK.
5	Press Stop/Exit.

PBX and TRANSFER

The machine is initially set to Normal, which lets the machine connect to a standard PSTN (Public Switched Telephone Network) line. However, many offices use a central telephone system or Private Branch Exchange (PBX). Your machine can be connected to most types of PBX. The machine's recall feature supports timed break recall only (TBR). TBR will work with most PBX systems allowing you to gain access to an outside line, or transfer calls to another extension. The feature works when Tel/R is pressed.

Note

You can program a Tel/R key press as part of a number stored in a One Touch dial or Speed Dial location. When programming the One Touch dial or Speed Dial number, press Tel/R first (the LCD shows ‘!’), then enter the telephone number. If you do this, you do not need to press Tel/R each time before you dial using a One Touch dial or Speed Dial location. (See Storing numbers.) However, if PBX is not chosen in the Telephone Line Type setting, you cannot use the One Touch dial or Speed Dial number that the Tel/R press is programmed into.

Page Top