Remote commands | Operation details | ||
95 | Change the Fax Forwarding or Fax Storage settings | ||
1 OFF | You can choose Off after you have retrieved or erased all your messages. | ||
2 Fax Forwarding | One long beep means the change is accepted. If you hear three short beeps, the change was not accepted because something has not been set up (for example, a Fax Forwarding number has not been registered). You can register your Fax Forwarding number by entering 4. (See Changing your Fax Forwarding number.) Once you have registered the number, Fax Forwarding will work. | ||
4 Fax Forwarding number | |||
6 Fax Storage | |||
96 | Retrieve a fax | ||
2 Retrieve all faxes | Enter the number of a remote fax machine to receive stored fax messages. (See Retrieving fax messages.) | ||
3 Erase faxes from the memory | If you hear one long beep, fax messages have been erased from the memory. | ||
97 | Check the receiving status | ||
1 Fax | You can check whether your machine has received any faxes. If yes, you will hear one long beep. If no, you will hear three short beeps. | ||
98 | Change the Receive Mode | ||
1 External TAD | If you hear one long beep, your change has been accepted. | ||
2 Fax/Tel | |||
3 Fax Only | |||
90 | Exit | Pressing 9 0 allows you to exit remote retrieval. Wait for the long beep, then replace the handset. |