Loading documents
You can send a fax, make copies, and scan from the ADF (automatic document feeder) and from the scanner glass.
Using the ADF
The ADF can hold up to 50 pages and feeds each sheet individually. Use standard 80 g/m
2
paper and always fan the pages before putting them in the ADF.
Recommended environment
Temperature:
20° C to 30° C
Humidity:
50% to 70%
Paper:
80 g/m
2
Page Top
Document Sizes Supported
Length:
(MFC-5890CN and MFC-5895CW)
148 to 355.6 mm
(MFC-6490CW)
148 to 431.8 mm
Width:
(MFC-5890CN and MFC-5895CW)
148 to 215.9 mm
(MFC-6490CW)
148 to 297 mm
Weight:
64 to 90 g/m
2
Page Top
How to load documents
CAUTION
DO NOT pull on the document while it is feeding.
DO NOT use paper that is curled, wrinkled, folded, ripped, stapled, paper clipped, pasted or taped.
DO NOT use cardboard, newspaper or fabric.
•
Make sure documents written with ink are completely dry.
1
Unfold the ADF Document Support
(1)
and the ADF Document Output Support Flap
(2)
.
2
Fan the pages well.
3
Adjust the paper guides
(1)
to fit the width of your documents.
4
Place your documents,
face up, top edge first
in the ADF until you feel them touch the feed roller.
Note
(MFC-6490CW only)
Insert A4/Letter documents short-edge first.
CAUTION
DO NOT leave thick documents on the scanner glass. If you do this, the ADF may jam.
Page Top