You can place a logo or text into your document as a Watermark. You can select one of the template watermarks, data from your media cards or USB Flash memory drive, or scanned data.
Note
| | Watermark Copy is not available with Fit to Page, Page Layout, Skew Adjustment and Book Copy. |
Using a template
| 1 | Press  ( Copy). |
| 2 | Load your document. |
| 3 | Enter the number of copies you want. |
| 4 | Press  or  to choose Watermark Copy. Press OK. |
| 5 | Press  or  to choose On. |
| 6 | Press or to choose Current Setting. Press OK. |
| 7 | Press or to choose Template. Press OK. |
| 8 | If you want to change any of the displayed settings, press or to choose the setting, and then press or to choose the option you want. |
| 9 | When you are finished changing settings, press or to choose Apply. Press OK. |
| 10 | Press Mono Start or Colour Start. |
Using data from a media card or USB Flash memory drive data
| 1 | Press ( Copy). |
| 2 | Load your document. |
| 3 | Enter the number of copies you want. |
| 4 | Press or to choose Watermark Copy. Press OK. |
| 5 | Press or to choose On. |
| 6 | Press or to choose Current Setting. Press OK. |
| 7 | Insert a media card or USB Flash memory drive. Press or to choose Media. Press OK. |
| 8 | Press or to choose the data you want to use for the watermark. Press OK. |
| 9 | If you want to change any of the displayed settings, press or to choose the setting, and then press or to choose the option you want. |
| 10 | When you are finished changing settings, press or to choose Apply. Press OK. |
| 11 | Press Mono Start or Colour Start.   CAUTION | | DO NOT take out the memory card or USB Flash memory drive while Photo Capture is blinking to avoid damaging the card, USB Flash memory drive or data stored on the card. |
|
Using a scanned paper document as your watermark
| 1 | Press ( Copy). |
| 2 | Enter the number of copies you want. |
| 3 | Press or to choose Watermark Copy. Press OK. |
| 4 | Press or to choose On. |
| 5 | Press or to choose Current Setting. Press OK. |
| 6 | Press or to choose Scan. Press OK, and place the page that you want to use as a watermark on the scanner glass. |
| 7 | Press Mono Start or Colour Start. |
| 8 | Take out the watermark document you scanned and load the document you want to copy. |
| 9 | Press or to change the Transparency of the watermark. Press OK. |
| 10 | Press Mono Start or Colour Start. Note | | You cannot enlarge or reduce the scanned watermark. |
|
