Home PrintPrevious Next

Copy options (temporary settings)

When you want to quickly change the copy settings temporarily for the next copy, use the temporary Copy keys. You can use different combinations.
Graphic
The machine returns to its default settings one minute after copying.

Enlarging or reducing the image copied

You can choose the following enlargement or reduction ratios:
Press
Graphic
100%*
97% LTRBsymbol.rarrA4
94% A4Bsymbol.rarrLTR
91% Full Page
85% LTRBsymbol.rarrEXE
83% LGLBsymbol.rarrA4
78% LGLBsymbol.rarrLTR
70% A4Bsymbol.rarrA5
50%
Custom(25-400%)
200%
141% A5Bsymbol.rarrA4
104% EXEBsymbol.rarrLTR
* The factory setting is shown in Bold with an asterisk.
Custom(25-400%) allows you to enter a ratio from 25% to 400%.
To enlarge or reduce the next copy follow the instructions below:
1
Load your document.
2
Use the numeric keys to enter the number of copies (up to 99).
3
Press Enlarge/Reduce.
4
Do one of the following:
•
Press Bsymbol.utri or Bsymbol.dtri to choose the enlargement or reduction ratio you want.
Press OK.
•
Press Bsymbol.utri or Bsymbol.dtri to choose Custom(25-400%).
Press OK.
Use the numeric keys to enter an enlargement or reduction ratio from 25% to 400%. (For example, press 5 3 to enter 53%.)
Press OK.
5
Press Mono Start or Colour Start.
Note Note
Page Layout Options 2 in 1(P), 2 in 1(L), 4 in 1(P) or 4 in 1(L) are not available with Enlarge/Reduce.
Page Top
Home PrintPrevious Next