Menu table

The factory settings are shown in Bold with an asterisk.

Choose & OK

to accept

to exit

Main Menu	Submenu	Menu Selections	Options	Descriptions	Page
1.General Setup	1.Paper	1.Paper Type	Thin Plain* Thick Thicker Recycled Paper	Sets the type of paper in the paper tray.	Paper Type
		2.Paper Size	A4* Letter Legal Executive A5 A5 L A6 B5 B6 Folio	Sets the size of the paper in the paper tray.	Paper Size
	2.Beeper	—	Off Low Med* High	Adjusts the volume level of the beeper.	Beeper volume
	3.Ecology	1.Toner Save	On Off*	Increases the page yield of the toner cartridge.	Toner Save
	3.Ecology	2.Sleep Time	Range varies depending on model. 005Min*	Conserves power.	Sleep Time
	4.LCD Contrast	—	-+ -+ -+ * -+ -+	Adjusts the contrast of the LCD.	LCD Contrast
	5.Document Scan	1.Glass ScanSize	A4* Letter	Adjusts the scan area of the scanner glass to the size of the document.	See Software User’s Guide on the CD-ROM.
	6.Reset	1.Network	1.Reset 2.Exit	Restores all network settings to factory default.	Reset functions
	6.Reset	2.All Settings	1.Reset 2.Exit	Restores all the machine settings to factory default.	Reset functions
	0.Local Language	—	(Choose your language.)	Allows you to change the LCD language for your country.	See Quick Setup Guide.
2.Copy	1.Quality	—	Text Photo Auto*	You can choose the Copy resolution for your type of document.	Improving copy quality
	2.Brightness	—	-+ -+ -+ * -+ -+	Adjust the brightness for copies.	Brightness
	3.Contrast	—	-+ -+ -+ * -+ -+	Adjusts the contrast for copies. You can change to the higher Copy resolution when you make a text copy with 100% ratio using the scanner glass.	Contrast
	4.Color Adjust	1.Red	-+ -+ -+ * -+ -+	Adjusts the red colour for copies.	Colour saturation
		2.Green	-+ -+ -+ * -+ -+	Adjusts the green colour for copies.
		3.Blue	-+ -+ -+ * -+ -+	Adjusts the blue colour for copies.
3.Printer	1.Emulation	—	Auto* HP LaserJet BR-Script 3	Chooses the emulation mode.	See Software User’s Guide on the CD-ROM.
	2.Print Options	1.Internal Font	1.HP LaserJet	Prints a list of the machine’s internal fonts.
		1.Internal Font	2.BR-Script 3	Prints a list of the machine’s internal fonts.
		2.Configuration	—	Prints a list of the machine’s printer settings.
		3.Test Print	—	Prints a test page.
	3.Output Color	—	Auto* Color B&W	Chooses colour or black & white printed documents. If you choose Auto, the machine selects a suitable option for the document (colour or B&W).
	4.Reset Printer	—	1.Reset	Restores the printer settings to the original factory default settings.
	4.Reset Printer	—	2.Exit
	5.Calibration	—	Calibrate Reset	Adjusts the colour density or returns the colour calibration to the factory settings.	Calibration
	6.Auto Regist.	1.Registration	1.Start	Adjust the print position of each colour automatically.	Auto Registration
		1.Registration	2.Exit	Adjust the print position of each colour automatically.
		2.Frequency	Low Medium* High Off	Set the interval time you want to carry out the auto registration.
	7.Manual Regist.	1.Print Chart	—	Print the chart to manually check the registration of the colours.	Manual Registration
	7.Manual Regist.	2.Set Regist.	1 Magenta 2 Cyan 3 Yellow 4 Magenta 5 Cyan 6 Yellow 7 Magenta 8 Cyan 9 Yellow	Sets the correction value on the chart you printed from Print Chart.	Manual Registration
	8.Drum Cleaning	—	—	Carry out cleaning the drum unit to improve the print quality problem.	Cleaning the drum unit
4.Network	1.TCP/IP	1.Boot Method	Auto* Static RARP BOOTP DHCP	Chooses the BOOT method that best suits your needs.	See Network User’s Guide on the CD-ROM.
		2.IP Address	[000-255]. [000-255]. [000-255]. [000-255]	Enter the IP address.
		3.Subnet Mask	[000-255]. [000-255]. [000-255]. [000-255]	Enter the Subnet mask.
		4.Gateway	[000-255]. [000-255]. [000-255]. [000-255]	Enter the Gateway address.
		5.Node Name	BRNXXXXXXXXXXXX	Enter the Node name.
		6.WINS Config	Auto* Static	Chooses the WINS configuration mode.
		7.WINS Server	Primary [000-255]. [000-255]. [000-255]. [000-255] Secondary [000-255]. [000-255]. [000-255]. [000-255]	Specifies the IP address of the primary or secondary WINS server.
		8.DNS Server	Primary [000-255]. [000-255]. [000-255]. [000-255] Secondary [000-255]. [000-255]. [000-255]. [000-255]	Specifies the IP address of the primary or secondary DNS server.
		9.APIPA	On* Off	Automatically allocates the IP address from the link-local address range.
		0.IPv6	On Off*	Enable or Disable the IPv6 protocol. If you want to use the IPv6 protocol, visit http://solutions.brother. com/ for more information.
	2.Ethernet	—	Auto* 100B-FD 100B-HD 10B-FD 10B-HD	Chooses the Ethernet link mode.
	0.Network Reset	1.Reset	—	Restore all network settings to factory default.
	0.Network Reset	2.Exit	—	Restore all network settings to factory default.
5.Machine Info.	1.Serial No.	—	—	You can check the serial number of your machine.	Checking the Serial Number
	2.Page Counter	—	Total List Copy Print	You can check the number of total pages the machine has printed during its life.	Checking the Page Counters
	3.User Settings	—	—	Lists your settings.	User Settings List
	4.Network Config	—	—	Lists your Network settings.	Network Configuration List
	5.Parts Life	1.Drum	1.Black(K) 2.Cyan(C) 3.Magenta(M) 4.Yellow(Y)	You can check the percentage of a machine part’s life that remains available.	Checking the remaining life of parts
		2.Belt Unit	—
		3.PF Kit	—
		4.Fuser	—

Page Top