Important information

Please read these instructions before attempting any maintenance, and keep them for later reference.

•	DO NOT use this product near water, or in a damp environment.
•	Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.
•	We DO NOT advise using an extension lead.
•	If any cables become damaged, disconnect your machine, and contact your Brother dealer.
•	DO NOT place any objects on the machine, or obstruct the air vents.
•	This product should be connected to an adjacent grounded AC power source within the range indicated on the rating label. DO NOT connect it to a DC power source. If you are not sure, contact a qualified electrician.

WARNING

Before cleaning the inside of the machine, unplug the power cord from the electrical socket.
DO NOT handle the plug with wet hands. Doing this might cause an electrical shock.
Always make sure the plug is fully inserted.
After you have just used the machine, some internal parts of the machine will be extremely hot. When you open the front or back cover of the machine, DO NOT touch the shaded parts shown in the illustration.
The fuser unit is marked with a caution label. DO NOT remove or damage the label.
To prevent injuries, be careful not to put your hands on the edge of the machine under the document cover as shown in the illustration.
To prevent injuries, DO NOT put your fingers in the area shown in the illustration.
DO NOT use a vacuum cleaner to clean up scattered toner. Doing this might cause the toner dust to ignite inside the vacuum cleaner, potentially starting a fire. Please carefully clean the toner dust with a dry, lint-free cloth and dispose of it according to local regulations.
If moving your machine, use the handholds provided. First making sure to disconnect any cables. To prevent injuries when moving or lifting this machine, make sure to use at least two people.
DO NOT use flammable substances or any type of spray to clean the inside or outside of the machine. Doing this may cause a fire or electrical shock. Refer to Routine maintenance for how to clean the machine.