You can choose the following enlargement or reduction ratios:
Press | |
97% LTR→A4 |
94% A4→LTR |
91% Full Page |
85% LTR→EXE |
83% LGL→A4 |
78% LGL→LTR |
70% A4→A5 |
50% |
Custom(25-400%) |
Auto |
200% |
141% A5→A4 |
104% EXE→LTR |
* The factory setting is shown in Bold with an asterisk.
When set to
Auto, the machine calculates the reduction ratio that best fits the paper size the paper tray is set to. (See
Paper Size.)
Auto is only available when using the ADF.
Custom(25-400%) allows you to enter a ratio from 25% to 400% in 1% increments.
To enlarge or reduce the next copy follow the instructions below:
| 1 | Load your document. |
| 2 | Use the dial pad to enter the number of copies (up to 99). |
| 3 | Press Enlarge/Reduce. |
| 4 | Do one of the following: | • | Press  or  to choose the enlargement or reduction ratio you want. Press OK. | | • | Press or to choose Custom(25-400%). Press OK. Use the dial pad to enter an enlargement or reduction ratio from 25% to 400%. (For example, press 5 3 to enter 53%.) Press OK. |
|
| 5 | Press Start. |
Note
| | Page Layout Options 2 in 1(P), 2 in 1(L), 4 in 1(P) or 4 in 1(L) are not available with Enlarge/Reduce. |
