Using the SecureEasySetup™ software to configure your machine for a wireless network

The SecureEasySetup™ software allows you to configure the wireless network easier than configuring it manually. By pushing a button on the wireless router or access point, you can complete setup and secure the wireless network. Your router or access point must also support SecureEasySetup™. See the user’s guide for your wireless LAN router or access point for instructions to configure your machine for a wireless network.

Note

Routers or access points that support SecureEasySetup™ have the SecureEasySetup™ symbol as shown below.

1	Push the SecureEasySetup™ button on your wireless router or access point. See the user’s guide for your wireless router or access point for instructions.
2	Press Menu on the control panel of the Brother machine.
3	Press or to select LAN. Press OK.
4	Press or to select Setup WLAN. Press OK.
5	Press or to select SecurEasySetup. Press OK.
6	The wireless network connection status using the SecureEasySetup™ software will be displayed; Connecting WLAN, Connected or Connection Error. Connecting WLAN is displayed when the print server is trying to make connections to your router or access point. Wait till either Connected or Connection Error is displayed. Connected is displayed when the print server is successfully connected to your router or access point. You can now use your machine in a wireless network. Connection Error is displayed when the print server has not successfully connected to your router or access point. Try starting from 1 again. If the same message is displayed again, reset the print server back to the default factory settings and try again.

Page Top