Function table and default factory settings

Level1	Level2	Level3	Options	Options
LAN	TCP/IP (Wired)	BOOT Method	Auto /Static/RARP/BOOTP/DHCP
		IP Address	Change	[000-255].[000-255].[000-255].[000-255]. [000].[000].[000].[000] ¹
		IP Address	Exit
		Subnet Mask	Change	[000-255].[000-255].[000-255].[000-255]. [000].[000].[000].[000] ¹
		Subnet Mask	Exit
		Gateway	Change	[000-255].[000-255].[000-255].[000-255]. [000].[000].[000].[000]
		Gateway	Exit
		Node Name	Change	BRN_XXXXXX= (last 6 figures of Ethernet address) (up to 15 characters) BRN_XXXXXX *
		Node Name	Exit
		WINS Config	Auto /Static
		WINS Server	Primary/Secondary	[000-255].[000-255].[000-255].[000-255]. [000].[000].[000].[000]
		DNS Server	Primary/Secondary	[000-255].[000-255].[000-255].[000-255]. [000].[000].[000].[000]
		APIPA	On /Off
LAN	TCP/IP (WLAN)	BOOT Method	Auto /Static/RARP/BOOTP/DHCP
		IP Address	Change	[000-255].[000-255].[000-255].[000-255]. [000].[000].[000].[000] ¹
		IP Address	Exit
		Subnet Mask	Change	[000-255].[000-255].[000-255].[000-255]. [000].[000].[000].[000] ¹
		Subnet Mask	Exit
		Gateway	Change	[000-255].[000-255].[000-255].[000-255]. [000].[000].[000].[000]
		Gateway	Exit
		Node Name	Change	BRW_XXXXXX= (last 6 figures of Ethernet address) (up to 15 characters) BRW_XXXXXX *
		Node Name	Exit
		WINS Config	Auto /Static
		WINS Server	Primary/Secondary	[000-255].[000-255].[000-255].[000-255]. [000].[000].[000].[000]
		DNS Server	Primary/Secondary	[000-255].[000-255].[000-255].[000-255]. [000].[000].[000].[000]
		APIPA	On /Off
	Setup WLAN	Setup Wizard	Searching SSID	Select SSID&Set (Select SSID from list or manually add SSID)
	Setup WLAN	SecureEasySetup	Connecting WLAN/Connected/Connection Error
LAN	WLAN Status	Status	Active(11b)/Active(11g) / Connection Error
		Signal	Strong/Medium/Weak/None
		SSID	(Shows SSID with up to 32 digits)
		Comm.Mode	Ad-hoc/Infrastructure
	Setup Misc.	Wired LAN	Auto /100B-FD/100B-HD/10B-FD/10B-HD
	Network I/F	Wired LAN
	Network I/F	WLAN
	Factory Reset		Yes/No

•	The factory settings are shown in bold.

¹	On connection to the network, the machine will automatically set the IP address and Subnet Mask to value appropriate for your network.

Page Top