Installation when using a Network Print Queue or Share (printer driver only)

Note

•	You must configure the IP address on your machine before you proceed with this chapter. If you have not configured the IP address, see Configuring your machine for a network with an Ethernet cable connection first.
•	Verify the host computer and print server are either on the same subnet, or that the router is properly configured to pass data between the two devices.
•	Before installation, if you are using Personal Firewall software (e.g. the Internet Connection Firewall available in Windows XP), disable it. Once you are sure that you can print, re-start your Personal Firewall software.

Start the CD-ROM installation menu program according to the Quick Setup Guide.

Select the model name and your language (if necessary), and then click Install Other Drivers or Utilities.

Click Printer Driver (Only).

Click Next in response to the Welcome message. Follow the on-screen instructions.

Select Standard Installation and click Next.

Select Network Shared Printer, and then click Next.

Select your printer’s queue, and then click OK.

Note

Contact your administrator if you are not sure about the location and name of the printer in the network.

Click Finish.