You can place a logo or text into your document as a Watermark. You can select one of the template watermarks (CONFIDENTIAL, DRAFT or COPY), data from your media cards or USB Flash memory drive, or scanned data.
Note
| | Fit to Page, Page Layout, Ink Save Mode and Book Copy are not available with Watermark Copy. |
Using a template data
| 1 | Load your document. |
| 2 | Enter the number of copies you want. |
| 3 | Press  or  to choose Watermark Copy. Press OK. |
| 4 | Press  or  to choose On. |
| 5 | Press or to choose Current Setting. Press OK. |
| 6 | Press or to choose Template. Press OK. |
| 7 | Change the settings from the options displayed on the LCD if required. |
| 8 | If you do not want to change additional settings, press Mono Start or Colour Start. |
Using media cards or a USB Flash memory drive data
| 1 | Load your document. |
| 2 | Enter the number of copies you want. |
| 3 | Press or to choose Watermark Copy. Press OK. |
| 4 | Press or to choose On. |
| 5 | Press or to choose Current Setting. Press OK. |
| 6 | Press or to choose Media. Insert a media card or USB Flash memory drive. |
| 7 | Press OK and press or to choose the data you want to use for the watermark. Note | | You can use your own image of up to 1280 × 1280 pixels as a watermark. |
|
| 8 | Press OK and change any additional settings from the options shown on the LCD. |
| 9 | If you do not want to change additional settings, press Mono Start or Colour Start. |
IMPORTANT
| | DO NOT take out the memory card or USB Flash memory drive while Photo Capture is blinking to avoid damaging the card, USB Flash memory drive or data stored on them. |
Using a scanned paper document as your watermark
| 1 | Enter the number of copies you want. |
| 2 | Press or to choose Watermark Copy. Press OK. |
| 3 | Press or to choose On. |
| 4 | Press or to choose Current Setting. Press OK. |
| 5 | Press or to choose Scan. Press OK and set the page that you want to use as a watermark on the scanner glass. |
| 6 | Press Mono Start or Colour Start. |
| 7 | Take out the watermark document you scanned and load the document you want to copy. |
| 8 | Press or to change the Transparency of the watermark. Press OK. |
| 9 | If you do not want to change any additional settings, press Mono Start or Colour Start. Note | | You cannot enlarge or reduce the scanned watermark. |
|
