You can scan monochrome and colour documents into a memory card. Monochrome documents will be stored in PDF (*.PDF) or TIFF file formats (*.TIF). Colour documents may be stored in PDF (*.PDF) or JPEG (*.JPG) file formats. The factory setting is 150 dpi Color and the default file format is PDF. For monochrome documents, the factory setting is 200×100dpi B/W and the default format is TIFF.
The machine automatically creates file names based on the current date. (For details, see the Quick Setup Guide.) For example, the fifth image scanned on July 1, 2006 would be named 01070605.PDF. You can change the colour and quality.
Quality | Selectable File Format |
150dpi Color | JPEG / PDF |
300dpi Color | JPEG / PDF |
600dpi Color | JPEG / PDF |
200x100dpi B/W | TIFF / PDF |
200dpi B/W | TIFF / PDF |
| 1 | Insert a CompactFlash®, Memory Stick®, Memory Stick Pro™, SecureDigital™, MultiMediaCard™ or xD-Picture Card™ into your machine.   WARNING | | Do not take out the media card while PhotoCapture is blinking to avoid damaging the card or data stored on the card. |
|
| 2 | Load your document. |
| 3 | Press  ( Scan). |
| 4 | Press  or  to select Scan to Card, choose one of the options below: | • | To change the quality press OK and go to step 5. | | • | To start scanning press Mono Start or Colour Start. |
|
| 5 | Press or to select the quality, choose one of the options below: | • | To change the file type press OK and go to step 6. | | • | To start scanning press Mono Start or Colour Start. |
|
| 6 | Press or to select the file type. Press Mono Start or Colour Start. |
