Search

Home > Introduction to Your Machine > Touchscreen LCD Overview

Touchscreen LCD Overview

You can switch Home screens by pressing image or image.

From the Home screens, you can access the various settings.

Home Screen

 Home Screen

This screen shows the machine’s status when the machine is idle. When displayed, it indicates that your machine is ready for the next command.

  1. image Quiet Mode

    This icon appears when the [Quiet Mode] setting is set to [On].

    The Quiet Mode setting can reduce printing noise. When Quiet Mode is turned on, the print speed becomes slower.

  2. image [Shortcuts]

    Create shortcuts for frequently used operations, such as scanning or copying.

    image
    Three Shortcuts tabs are available with six Shortcuts on each tab.
    image
  3. image Wireless Status

    Each icon in the following table shows the wireless network status:

    image
    • Your machine is not connected to the wireless access point/router.

      Press this button to configure wireless settings. For more detailed information, see the Quick Setup Guide.

    • The wireless setting is disabled.
    image

    The wireless network is connected.

    A three-level indicator in each of the Home screens displays the current wireless signal strength.

    image

    The wireless access point/router cannot be detected.

    image

    You can configure wireless settings by pressing the Wireless Status button.

  4. image [Settings]

    Press to access the [Settings] menu.

  5. image [Ink]

    Displays the approximate available ink volume. Press to access the [Ink] menu.

    When an ink cartridge is near the end of its life or having a problem, an error icon is displayed on the ink colour indicator.

  6. Modes:

    Press to switch to each mode.

    [Copy] / [Cut Copy] / [Scan] / [Web] / [Apps] / [Download Software] /[Print Head Cleaning]

  7. Information icon
    image

    New information from Brother appears in the information bar when the notification settings such as [Message from Brother] and [Firmware Auto Check] are set to [On].

    (Internet connection is needed, and data rates may apply.)

    Press image to view the details.

  8. Warning icon
    image

    The warning icon image appears when there is an error or maintenance message; press image to view the details, and then press image to return to the Home screen.

Did you find the information you needed?