Pull the paper tray completely out of the machine.

If the paper support flap is open, close it and lift the output paper tray cover (1).

Press and slide the paper side guides (1) and paper length guide (2) to fit the paper size.

Fan the stack of paper well to avoid paper jams and misfeeds.

Gently put the paper into the paper tray print side down and top edge first.

Check that the paper is flat in the tray.

Gently adjust the paper side guides with both hands and the paper length guide to the paper.

Make sure the paper side guides touch the sides of the paper.

Close the paper tray cover.

Slowly push the paper tray completely into the machine.

While holding the paper tray in place, pull out the paper support (1) until it clicks and unfold the paper support flap (2).