Adjusting Brightness, Contrast and Colour

1	Press Menu.
2	Press or to choose 2.PhotoCapture. Press OK.
3	Press or to choose 5.Brightness. Press OK.
4	Press or to make a lighter or darker print. Press OK.
5	Press Stop/Exit.

You can select the contrast setting. More contrast will make an image look sharper and more vivid.

1	Press Menu.
2	Press or to choose 2.PhotoCapture. Press OK.
3	Press or to choose 6.Contrast. Press OK.
4	Press or to increase or decrease the contrast. Press OK.
5	Press Stop/Exit.

You can turn on the colour enhancement feature to print more vivid images. Printing time will be slower.

Press Menu.

Press

to choose 2.PhotoCapture.

Press OK.

Press

to choose 7.Color Enhance.

Press OK.

Press

to choose On (or Off).

Press OK.

•	If selecting Off, then go to 7.

Press

to choose 1.White Balance, 2.Sharpness or 3.Color Density.

Press OK.

Press

to adjust the degree of the setting.

Press OK.

Press Stop/Exit.

Note

•	White Balance This setting adjusts the hue of the white areas of an image. Lighting, camera settings and other influences will effect the appearance of white. The white areas of a picture may be slightly pink, yellow or some other colour. By using this, you can correct this effect and bring the white areas back to pure white.
•	Sharpness This setting enhances the detail of an image, similar to adjusting the fine focus on a camera. If the image is not in true focus and you cannot see the fine details of the picture, then adjust the sharpness.
•	Colour Density This setting adjusts the total amount of colour in the image. You can increase or decrease the amount of colour in an image to improve a washed out or weak picture.