Search

Home > Security > Store Print Log to Network > Use the Store Print Log to Network's Error Detection Setting

Use the Store Print Log to Network's Error Detection Setting

Use Error Detection Settings to determine the action that is taken when the print log cannot be stored to the server due to a network error.
  1. Start your web browser.
  2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).

    For example:

    https://192.168.1.2

  3. If required, type the password in the Login field, and then click Login.
    image
    The default password to manage this machine’s settings is located on the back of the machine and marked "Pwd".
  4. Go to the navigation menu, and then click Administrator>Store Print Log to Network.
    image
    Start from image, if the navigation menu is not shown on the left side of the screen.
  5. In the Error Detection Setting section, select the Cancel Print or Ignore Log & Print option.
    Option
    Description
    Cancel Print
    If you select the Cancel Print option, the print jobs are cancelled when the print log cannot be stored to the server.
    image

    Even if you select the Cancel Print option, your machine will print a received fax.

    Ignore Log & Print
    If you select the Ignore Log & Print option, the machine prints the documentation even if the print log cannot be stored to the server.

    When the store print log function has recovered, the print log is recorded as follows:

    image
    1. If the log cannot be stored at the end of printing, the print log except the number of printed pages will be recorded.
    2. If the print log cannot be stored at the beginning and the end of printing, the print log of the job will not be recorded. When the function has recovered, the error is reflected in the log.
  6. Click Submit to display the Test Print Log to Network page.
    To test your settings, click Yes and then go to the next step.
    To skip the test, click No. Your settings will be submitted automatically.
  7. The machine will test your settings.
  8. If your settings are accepted, Test OK appears on the screen.
    If Test Error appears, check all settings, and then click Submit to display the Test page again.
Did you find the information you needed?