Search

Site Map

Load and Print Envelopes Using the MP Tray

Before loading, press the corners and sides of the envelopes to make them as flat as possible.

image

When you load a different size and type of paper in the tray, you must also change the Paper Size and Paper Type settings on the machine, or on your computer.

  1. Open the machine's back cover (the face up output tray).
    image
  2. On the front of the machine, open the MP tray and lower it gently.
    image
  3. Extend the MP tray support.
    image
  4. Slide the MP tray paper guides to fit the width of the envelopes that you are using.
    image
  5. Load envelopes with the printing surface face up in the MP tray.
    image
    image
    • Load the envelopes in the MP tray with the printing surface face up. Make sure the envelopes are below the maximum paper mark (1).
  6. Change your print preferences in the Print dialog box.
    Settings
    Options for Envelopes

    Paper Size

    Com-10

    DL

    C5

    Monarch

    Media Type

    Envelopes

    Env. Thick

    Env. Thin

  7. Send your print job to the machine.
  8. When finished, close the back cover (the face up output tray) until it locks in the closed position.
Related Information
Did you find the information you needed?

find moreaccept