Home > Security > Network Security Features > Secure Function Lock 3.0 > Configure Secure Function Lock 3.0 Using Web Based Management
Configure Secure Function Lock 3.0 Using Web Based Management
- Start your web browser.
- Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
For example:
http://192.168.1.2
- No password is required by default. Type a password if you have set one, and then click .
- Click the Administrator tab.
- Click the User Restriction Function menu in the left navigation bar.
- Select Secure Function Lock.
- Click Submit.
- Click the Restricted Functions menu in the left navigation bar.
- In the User List / Restricted Functions field, type a group name or user name.
- In the Print and the other columns, select a check box to allow or clear a check box to restrict the function listed.
- To configure the maximum page count, select the On check box in the Page Limits column, and then type the maximum number in the Max. Pages field.
- Click Submit.
- Click the User List menu in the left navigation bar.
- In the User List field, type the user name.
- In the PIN Number field, type a four-digit password.
- Select User List / Restricted Functions from the drop-down list for each user.
- Click Submit.
Did you find the information you needed?