软件及网络使用说明书
MFC‑J3520 / MFC‑J3720
- 扫描
- 扫描前
- 配置网络扫描 (Windows®)
- 配置网络扫描 (Macintosh)
- 使用设备上的扫描键进行扫描
- 扫描照片和图像
- 将扫描数据作为 PDF 文件保存至文件夹
- 将扫描数据保存至存储卡或 USB 闪存盘
- 使用存储卡或 USB 闪存盘
- 扫描到介质卡设置
- 更改扫描到介质卡的默认设置
- 将设置恢复为出厂预设值
- 扫描多张名片和照片 (自动裁剪)
- 使用光学字符识别 (OCR) 扫描到可编辑文本文件
- 扫描到电子邮件附件
- 将扫描数据发送到邮件服务器
- 扫描到 FTP
- 设置扫描到 FTP 配置文件
- 将扫描数据上传到 FTP 服务器
- 扫描到网络 (Windows®)
- 设置扫描到网络配置文件
- 通过网络基本管理设置日期和时间
- 将扫描数据上传到 CIFS 服务器
- 设置扫描到网络配置文件
- 用于网络扫描的网络服务 (Windows Vista® SP2 或更高版本、Windows® 7 和 Windows® 8)
- 从 Brother 设备使用网络服务进行扫描 (Windows Vista® SP2 或更高版本、Windows® 7 和 Windows® 8)
- 配置网络服务的扫描设置
- 使用 ControlCenter4 更改扫描键设置 (Windows®)
- 使用 ControlCenter2 更改扫描键设置 (Macintosh)
- 从计算机扫描 (Windows®)
- 使用 ControlCenter4 标准模式进行扫描 (Windows®)
- 使用 ControlCenter4 标准模式扫描照片和图像 (Windows®)
- 使用 ControlCenter4 标准模式选择文档类型 (Windows®)
- 自定义扫描设置 (Windows®)
- 使用 ControlCenter4 标准模式更改扫描尺寸 (Windows®)
- 使用 ControlCenter4 标准模式裁剪扫描图像 (Windows®)
- 使用 ControlCenter4 标准模式打印扫描的数据 (Windows®)
- 在 ControlCenter4 标准模式下使用应用程序打开 (Windows®)
- 使用 ControlCenter4 标准模式选择文档类型 (Windows®)
- 使用 ControlCenter4 标准模式将扫描数据作为 PDF 文件保存至文件夹 (Windows®)
- 使用 ControlCenter4 标准模式同时扫描多张名片和照片 (自动裁剪) (Windows®)
- 使用 ControlCenter4 标准模式扫描到应用程序 (Windows®)
- 使用 ControlCenter4 标准模式扫描到电子邮件附件 (Windows®)
- 使用 ControlCenter4 标准模式扫描到可编辑文本文件 (OCR) (Windows®)
- 使用 ControlCenter4 标准模式在自动进稿器高速模式下进行扫描 (Windows®)
- 使用 ControlCenter4 标准模式扫描照片和图像 (Windows®)
- 使用 ControlCenter4 高级模式进行扫描 (Windows®)
- 使用 ControlCenter4 高级模式扫描照片和图像 (Windows®)
- 使用 ControlCenter4 高级模式将扫描数据作为 PDF 文件保存至文件夹 (Windows®)
- 使用 ControlCenter4 高级模式同时扫描多张名片和照片 (自动裁剪) (Windows®)
- 使用 ControlCenter4 高级模式扫描到电子邮件附件 (Windows®)
- 使用 ControlCenter4 高级模式扫描到可编辑文本文件 (OCR) (Windows®)
- 使用 ControlCenter4 高级模式在自动进稿器高速模式下进行扫描 (Windows®)
- 使用丹青文件管理或其他 Windows® 应用程序进行扫描
- TWAIN 驱动程序设置 (Windows®)
- 使用 Windows® 照片库或 Windows® 传真和扫描进行扫描
- WIA 驱动程序设置 (Windows®)
- 使用 ControlCenter4 标准模式进行扫描 (Windows®)
- 从计算机扫描 (Macintosh)
- 使用 ControlCenter2 扫描 (Macintosh)
- 使用 ControlCenter2 扫描文档和照片 (Macintosh)
- 使用 ControlCenter2 将扫描数据作为 PDF 文件保存至文件夹 (Macintosh)
- 使用 ControlCenter2 扫描到电子邮件附件 (Macintosh)
- 使用 ControlCenter2 扫描到可编辑文本文件 (OCR) (Macintosh)
- 使用 ControlCenter2 在自动进稿器高速模式下进行扫描 (Macintosh)
- 使用丹青文件管理或 TWAIN 兼容应用程序进行扫描 (Macintosh)
- TWAIN 驱动程序设置 (Macintosh)
- NewSoft 技术支持
- 使用 Apple 图像捕捉 (ICA 驱动程序) 扫描
- ICA 驱动程序设置
- 使用 ControlCenter2 扫描 (Macintosh)
- 打印
- 打印前
- 从计算机打印 (Windows®)
- 基本打印方法 (Windows®)
- 打印照片 (Windows®)
- 打印文档 (Windows®)
- 打印预览 (Windows®)
- 更改纸张大小 (Windows®)
- 创建自定义纸张大小 (Windows®)
- 满幅打印 (Windows®)
- 更改打印方向 (纵向或横向) (Windows®)
- 打印同一文档的多份副本 (Windows®)
- 更改介质类型 (Windows®)
- 在慢干纸上打印时 (Windows®)
- 更改打印质量 (Windows®)
- 更改彩色模式 (Windows®)
- 在单张纸上打印多个页面 (N 合 1) (Windows®)
- 打印海报 (Windows®)
- 自动在纸张两面打印 (自动双面打印) (Windows®)
- 自动打印成小册子 (Windows®)
- 更改纸张来源 (Windows®)
- 高级打印方法 (Windows®)
- 以灰度模式打印彩色文档 (Windows®)
- 调整打印的色彩设置 (Windows®)
- 更改打印质量和打印速度的优先顺序 (Windows®)
- 提高图片打印质量 (Windows®)
- 在节墨模式下打印 (Windows®)
- 缩放打印 (Windows®)
- 镜像打印 (Windows®)
- 反转打印 (Windows®)
- 在文档中打印水印 (Windows®)
- 在文档中打印日期、时间和计算机登录用户名 (页眉页脚打印) (Windows®)
- 通过更改打印数据传输模式调整打印质量和打印速度 (Windows®)
- 选择半色调的表示方法 (Windows®)
- 调整打印输出的色彩以匹配计算机屏幕 (Windows®)
- 防止双面打印脏污或卡纸 (Windows®)
- 获取打印机的颜色数据 (Windows®)
- 保存打印数据的存档文件 (Windows®)
- 选择打印配置文件 (Windows®)
- 添加打印配置文件
- 删除打印配置文件
- 更改默认打印设置 (Windows®)
- 在计算机上管理设备 (Windows®)
- 清洁打印头 (Windows®)
- 在计算机上监控墨水余量和设备状态 (Windows®)
- 取消打印作业 (Windows®)
- 关闭状态监控器 (Windows®)
- 什么是状态监控器指示灯? (Windows®)
- 关闭错误时弹出功能 (Windows®)
- 基本打印方法 (Windows®)
- 从计算机打印 (Macintosh)
- 打印照片 (Macintosh)
- 打印文档 (Macintosh)
- 设置打印选项 (Macintosh)
- 打印同一文档的多份副本 (Macintosh)
- 自动在纸张两面打印 (自动双面打印) (Macintosh)
- 更改纸张大小 (Macintosh)
- 创建自定义尺寸 (Macintosh)
- 满幅打印 (Macintosh)
- 更改打印方向 (纵向或横向) (Macintosh)
- 在单张纸上打印多个页面 (N 合 1) (Macintosh)
- 反转打印 (Macintosh)
- 水平翻转 (Macintosh)
- 缩放打印 (Macintosh)
- 更改介质类型 (Macintosh)
- 更改打印质量 (Macintosh)
- 以灰度模式打印彩色文档 (Macintosh)
- 缩小或放大文档布局 (Macintosh)
- 更改纸张来源 (Macintosh)
- 通过更改打印数据传输模式调整打印质量和打印速度 (Macintosh)
- 防止双面打印脏污或卡纸 (Macintosh)
- 更改纸张厚度设置 (Macintosh)
- 更改打印质量和打印速度的优先顺序 (Macintosh)
- 更改彩色模式 (Macintosh)
- 调整打印的色彩设置 (Macintosh)
- 选择半色调的表示方法 (Macintosh)
- 在计算机上管理设备 (Macintosh)
- 获取打印机的颜色数据 (Macintosh)
- 清洁打印头 (Macintosh)
- 在计算机上监控设备状态 (Macintosh)
- 照片
- 复制照片前
- 兼容的存储卡和 USB 闪存盘
- 将介质卡中的照片复制到计算机
- 复制通过本地连接的介质卡中的照片 (Windows®)
- 复制通过网络连接的介质卡中的照片 (Windows®)
- 复制通过本地连接的介质卡中的照片 (Macintosh)
- 复制通过网络连接的介质卡中的照片 (Macintosh)
- 使用 ControlCenter4 复制介质卡中的照片 (Windows®)
- 使用 ControlCenter4 标准模式将存储卡或 USB 闪存盘中的照片复制到计算机 (Windows®)
- 使用 ControlCenter4 高级模式将存储卡或 USB 闪存盘中的照片复制到计算机 (Windows®)
- 使用 ControlCenter4 高级模式将存储卡或 USB 闪存盘中的照片复制到计算机并启动应用程序 (Windows®)
- 从 ControlCenter4 打印照片 (Windows®)
- 使用 ControlCenter4 裁剪照片 (Windows®)
- 使用 ControlCenter4 自动修正照片 (Windows®)
- 使用 ControlCenter4 去除红眼 (Windows®)
- 使用 ControlCenter4 以黑白或棕色打印彩色照片 (Windows®)
- 使用 ControlCenter4 增强照片图像 (Windows®)
- ControlCenter4 中的编辑按钮功能 (Windows®)
- PC-FAX
- PC-FAX (Windows®)
- 从计算机发送传真 (Windows®)
- 使用 PC-FAX 前 (Windows®)
- 配置用户信息 (Windows®)
- 配置发送选项卡 (Windows®)
- 选择地址簿 (Windows®)
- 使用 Brother 地址簿 (Windows®)
- 添加地址簿成员 (Windows®)
- 创建多址发送组 (Windows®)
- 编辑成员或组 (Windows®)
- 导出地址簿 (Windows®)
- 删除成员或组 (Windows®)
- 将信息导入至地址簿 (Windows®)
- 使用 Brother 地址簿 (Windows®)
- 使用 PC-FAX 传真文件 (Windows®)
- 封页设置 (Windows®)
- 使用 ControlCenter4 发送传真 (Windows®)
- 使用 ControlCenter4 标准模式以传真方式发送扫描的图像 (Windows®)
- 使用 ControlCenter4 高级模式以传真方式发送扫描的图像 (Windows®)
- 使用 PC-FAX 前 (Windows®)
- 将传真接收到计算机 (Windows®)
- 使用 Brother PC-FAX 接收软件接收传真 (Windows®)
- 在计算机上运行 Brother PC-FAX 接收软件 (Windows®)
- 设置计算机进行 PC-FAX 接收 (Windows®)
- 配置网络 PC-FAX 接收设置 (Windows®)
- 浏览接收到的信息 (Windows®)
- 在计算机上运行 Brother PC-FAX 接收软件 (Windows®)
- 使用 ControlCenter4 浏览和打印传真 (Windows®)
- 使用 Brother PC-FAX 接收软件接收传真 (Windows®)
- 从计算机发送传真 (Windows®)
- PC-FAX (Macintosh)
- 从计算机发送传真 (Macintosh)
- 从应用程序发送传真 (Macintosh)
- 使用 ControlCenter2 发送传真 (Mac OS X v10.6.8)
- 从计算机发送传真 (Macintosh)
- 远程设置
- 远程设置 (Windows®)
- 从计算机设置 Brother 设备 (Windows®)
- 使用 ControlCenter4 设置 Brother 设备 (Windows®)
- 使用 ControlCenter4 设置地址簿 (Windows®)
- 远程设置 (Macintosh)
- 从计算机设置 Brother 设备 (Macintosh)
- 使用 ControlCenter2 设置 Brother 设备 (Macintosh)
- 使用 ControlCenter2 设置地址簿 (Macintosh)
- ControlCenter
- ControlCenter4 (Windows®)
- 更改 ControlCenter4 的操作模式 (Windows®)
- 使用 ControlCenter4 标准模式进行扫描 (Windows®)
- 使用 ControlCenter4 高级模式进行扫描 (Windows®)
- ControlCenter4 标准模式的扫描设置 (Windows®)
- ControlCenter4 高级模式的扫描设置 (Windows®)
- 使用 ControlCenter4 设置 Brother 设备 (Windows®)
- 使用 ControlCenter4 发送传真 (Windows®)
- 使用 ControlCenter4 浏览和打印传真 (Windows®)
- 使用 ControlCenter4 高级模式复印文档 (Windows®)
- 从 ControlCenter4 启动 BRAdmin 实用程序 (Windows®)
- 使用 ControlCenter4 高级模式创建自定义选项卡 (Windows®)
- ControlCenter2 (Macintosh)
- 使用 ControlCenter2 扫描 (Macintosh)
- ControlCenter2 的扫描设置 (Macintosh)
- 使用 ControlCenter2 设置 Brother 设备 (Macintosh)
- 使用 ControlCenter2 发送传真 (Mac OS X v10.6.8)
- 关闭自动加载功能 (Macintosh)
- 使用 ControlCenter2 配置副本按钮 (Mac OS X v10.6.8)
- 网络
- 启动
- 支持的基本网络功能
- 选择网络连接类型
- 有线网络连接示例
- 使用 TCP/IP 的对等打印
- 网络共享打印
- 无线网络连接示例
- 通过网络中的无线局域网接入点路由器连接到计算机 (基础架构模式)
- 不通过网络中的无线局域网接入点路由器连接到无线计算机 (Ad-Hoc 模式)
- 有线网络连接示例
- 学习使用网络管理软件和实用程序
- 了解网络管理软件和实用程序
- 什么是 BRAdmin Light? (Windows® 和 Macintosh)
- 什么是 BRAdmin Professional 3? (Windows®)
- 什么是网络基本管理?
- 什么是远程设置? (Windows® 和 Macintosh)
- 安装或访问网络管理软件和实用程序
- 安装 BRAdmin Light (Windows® 和 Macintosh)
- 安装适用于 Windows® 的 BRAdmin Light
- 安装适用于 Macintosh 的 BRAdmin Light
- 安装 BRAdmin Professional 3 (Windows®)
- 访问网络基本管理
- 设置网络基本管理的登录密码
- 访问远程设置程序 (Windows® 和 Macintosh)
- 访问适用于 Windows® 的远程设置程序
- 访问适用于 Macintosh 的远程设置程序
- 安装 BRAdmin Light (Windows® 和 Macintosh)
- 了解网络管理软件和实用程序
- 更改设备的网络设置
- 使用 Brother 操作面板更改网络设置
- 使用网络基本管理更改网络设置
- 使用 BRAdmin Light 更改网络设置 (Windows® 和 Macintosh)
- 使用 BRAdmin Professional 3 更改网络设置 (Windows®)
- 使用远程设置更改网络设置 (Windows® 和 Macintosh)
- 配置设备无线网络的其他方法
- 使用 Wi-Fi Protected Setup™ (WPS) 的 PIN 方式配置无线网络
- 使用 Wi-Fi Protected Setup (WPS) 的 PIN 方式时的两种无线网络连接类型
- 如何使用 Wi-Fi Protected Setup (WPS) 的 PIN 方式配置无线网络
- 在 Ad-Hoc 模式下配置无线网络 (适用于 IEEE 802.11b/g/n)
- 使用新的 SSID 在 Ad-Hoc 模式下配置无线网络
- 不多址发送 SSID 时配置无线网络
- 使用 Wi-Fi Protected Setup™ (WPS) 的 PIN 方式配置无线网络
- 高级网络功能
- 打印网络配置报告
- 使用因特网进行传真 (I-Fax)
- 关于 I-Fax 的重要信息
- 配置设备的 I-Fax
- I-Fax 的初始设置
- 发送 I-Fax
- 自动接收 I-Fax
- 手动轮询服务器
- 接收的 I-Fax 如何显示在计算机上
- I-Fax 选项
- 转发接收的电子邮件和传真信息
- 中继多址发送
- 从 Brother 设备进行中继多址发送
- 从计算机进行中继多址发送
- 传输 (TX) 验证邮件
- 启用传输验证邮件的发送通知
- 启用传输验证邮件的接收通知
- 错误邮件
- 使用网络基本管理与 SNTP 服务器同步时间
- 使用网络基本管理配置日期和时间
- 使用网络基本管理配置 SNTP 协议
- 安全功能
- 安全功能锁 2.0
- 使用网络基本管理配置安全功能锁 2.0
- 使用安全功能锁 2.0 进行扫描
- 配置公共模式
- 按照计算机用户登录名限制 PC 打印
- 安全功能锁 2.0 的其他功能
- 支持的安全协议和功能
- 安全协议
- 发送和接收电子邮件的安全方法
- 安全术语
- 使用 SSL/TLS 安全管理网络设备
- 使用网络基本管理配置证书
- 支持的安全证书功能
- 导入和导出 CA 证书
- 导入 CA 证书
- 导出 CA 证书
- 管理多个证书
- 使用网络基本管理配置证书
- 安全发送或接收电子邮件
- 使用网络基本管理配置加密电子邮件发送或接收
- 发送带用户认证的电子邮件
- 使用 SSL/TLS 安全发送或接收电子邮件
- 安全功能锁 2.0
- 适用于高级用户的技术信息
- 支持的协议
- Windows® 下的其他网络设置
- 安装用于通过网络服进行打印和扫描的驱动程序 (Windows Vista®、Windows® 7 和 Windows® 8)
- 卸载用于通过网络服进行打印和扫描的驱动程序 (Windows Vista®、Windows® 7 和 Windows® 8)
- 安装使用纵向配对时适用于基础架构模式的打印和扫描驱动程序 (Windows® 7 和 Windows® 8)
- 可用服务
- 配置 IP 地址的其他方式
- 使用 DHCP 配置 IP 地址
- 使用 BOOTP 配置 IP 地址
- 使用 RARP 配置 IP 地址
- 使用 APIPA 配置 IP 地址
- 使用 ARP 配置 IP 地址
- 将网络设置重置为出厂默认设置
- 打印无线网络报告
- 无线网络报告错误代码
- 故障排除
- 可能会解决问题的预故障排除操作
- 确定和解决问题
- 在哪里能找到 Brother 设备的网络设置?
- 我无法完成无线网络设置配置。
- 使用网络连接修复工具 (Windows®)
- MFL-Pro Suite 安装过程中无法在网络中找到我的 Brother 设备。
- 我的 Brother 设备无法进行网络打印或扫描。
- 即使安装成功后,仍无法在网络上找到我的 Brother 设备。
- 我的安全设置无法正确工作。
- 我想检查我的网络设备是否正确运行。
- Brother 操作面板上的网络菜单
- TCP/IP
- 以太网 (仅限有线网络)
- 有线网络状态
- MAC 地址
- WLAN Assistant (仅限无线网络)
- 安装向导 (仅限无线网络)
- WPS/AOSS™ (仅限无线网络)
- 有 PIN 密码的 WPS (仅限无线网络)
- 无线网络状态 (仅限无线网络)
- 网络接口 (有线和无线网络)
- Wi-Fi Direct™ (仅限无线网络)
- 电子邮件 I-Fax
- 邮件地址
- 设置服务器
- 设置邮件接收
- 设置邮件发送
- 设置传输发送
- 网络重置
- 附录
- 如何在 Brother 设备的触摸屏上输入文本
词汇 | 网站地图