Search

Site Map

Home > Paper Handling > Load Paper > Load Paper in the Manual Feed Slot

Load Paper in the Manual Feed Slot

Related Models:MFC‑J5010DW
Load special print media in this slot, one sheet at a time.
image
The machine automatically turns on Manual Feed mode when you put paper in the manual feed slot.
  1. Open the manual feed slot cover.
    image
    image
  2. Slide the manual feed slot paper guides to fit the width of the paper you are using.
    image
  3. Load only one sheet of paper in the manual feed slot with the printing surface face up.
    Using both hands, push one sheet of paper into the manual feed slot until the feeding edge touches the paper feed rollers. Let go of the paper when you feel the machine pull it. The LCD displays [Manual Feed Slot ready].

    Read the instruction displayed on the LCD, and then press [OK].

    image
    image
    image
    • When using envelopes, load the envelopes with the printing surface face up and the flap on the left as shown in the illustration.
      image
    • When loading an envelope, or a sheet of thick paper, push the envelope into the manual feed slot until you feel the paper feed rollers grab it.
    IMPORTANT

    • DO NOT load more than one sheet of paper in the manual feed slot at any time. Doing this may cause a paper jam. When printing multiple pages, do not feed the next sheet of paper until the touchscreen displays a message instructing you to feed the next sheet.

    • DO NOT load paper in the manual feed slot when you are printing from the paper tray. Doing this may cause a paper jam.

  4. Pull out the paper support (1) until it locks into place, and then unfold the paper support flap (2).
    image
image
  • If the document does not fit on one sheet, the LCD will prompt you to load another sheet of paper. Place another sheet of paper in the manual feed slot, and then press [OK].
  • Make sure printing has finished before you close the manual feed slot cover.
  • The machine will eject paper loaded in the manual feed slot while a test page, fax, or report is being printed.
  • The machine will eject paper loaded in the manual feed slot during the machine's cleaning process. Wait until the machine finishes its cleaning, and then load paper in the manual feed slot.
Related Information
Did you find the information you needed?

find moreaccept