Loading documents
Using the automatic document feeder (ADF)
The ADF can hold up to 35 pages and feeds each sheet individually. Use standard 80 g/m
2
paper and always fan the pages before putting them in the ADF.
Recommended environment
Temperature: 20 to 30° C
Humidity: 50% - 70%
Paper: APP Blue Flagship 70 g/m
2
, APP Gold Flagship 80 g/m
2
or Advanced Agro Double A 80 g/m
2
IMPORTANT
•
DO NOT leave thick documents on the scanner glass. If you do this, the ADF may jam.
•
DO NOT use paper that is curled, wrinkled, folded, ripped, stapled, paper-clipped, pasted or taped.
•
DO NOT use cardboard, newspaper or fabric.
•
To avoid damaging your machine while using the ADF, DO NOT pull on the document while it is feeding.
Note
To scan documents that are not suitable for the ADF, see
Using the scanner glass
.
•
Make sure documents with correction fluid or written with ink are completely dry.
•
Documents to be faxed must be from 147.3 to 215.9 mm wide and from 147.3 to 356 mm long, and of a standard weight [80 g/m
2
].
1
Unfold the ADF document output support flap
(1)
and the ADF support flap
(2)
.
2
Fan the pages well.
3
Place your document
face up, top edge first
in the ADF until the LCD display message changes and you feel it touch the feed rollers.
4
Adjust the paper guides
(1)
to fit the width of your document.
Page Top
IMPORTANT
Note 
