You can use the Transmission Verification Report as proof that you sent a fax. This report lists the sender’s name or fax number, the time and date of transmission, duration of transmission, number of pages sent, and whether or not the transmission was successful.
There are several settings available for the Transmission Verification Report:
| • | On: Prints a report after every fax you send. |
| • | On+Image: Prints a report after every fax you send. A portion of the fax’s first page appears on the report. |
| • | Off: Prints a report if your fax is unsuccessful due to a transmission error. Off is the default setting. |
| • | Off+Image: Prints a report if your fax is unsuccessful due to a transmission error. A portion of the fax’s first page appears on the report. |
| 1 | Press Menu, 2, 4, 1. |
| 2 | Press  or  to choose On, On+Image, Off or Off+Image. Press OK. |
| 3 | Press Stop/Exit.  Note | • | If you choose On+Image or Off+Image, the image will only appear on the Transmission Verification Report if Real Time Transmission is set to Off. (See Real Time Transmission.) | | • | If your transmission is successful, “OK” will appear next to “RESULT” on the Transmission Verification Report. If transmission is not successful, “ERROR” will appear next to “RESULT”. |
|
