Accessories tab

Note

From the Start menu, select Control Panel and then Printers and Faxes¹. Right-click the Brother MFC-XXXX Printer (Brother DCP-XXXX Printer) icon and select Properties to access the Accessories tab.

¹	Printers for Windows^® 2000 users.

When you install optional accessories, you can add and choose their settings in the Accessories tab as follows.

•

Available Options (1)

You can manually add and remove the options that are installed on the printer. Tray settings will match the installed options.

•

Paper Source Setting (2)

This feature shows the current paper size for each paper tray.

•

Serial No. (3)

By clicking Auto Detect, the printer driver will query the printer and display its serial number. If it fails to receive the information, the screen will display "---------".

•

Auto Detect (4)

The Auto Detect function finds the currently installed optional devices and shows the available settings in the printer driver. When you click Auto Detect, options that are installed on the printer will be listed in Available Options (1). You can manually add or remove the options by choosing an optional device you want to add or remove, and then clicking Add or Remove.

Note

The Auto Detect function is not available under the following printer conditions:

•	The printer power switch is off.
•	The printer is in an error state.
•	The printer is in a network shared environment.
•	The cable is not connected to the printer correctly.

Page Top