Loading paper in the manual feed slot

You can load envelopes and special print media one at a time into this slot. Use the manual feed slot to print or copy on labels, envelopes or thicker paper.

Printing on plain paper, recycled paper or transparencies from the manual feed slot

Note

The machine automatically turns on the Manual Feed mode when you put paper in the manual feed slot.

1	Lift up the support flap (1) to prevent paper from sliding off the face-down output tray, or remove each page as soon as it comes out of the machine.
2	Open the manual feed slot cover.
3	Using both hands, slide the manual feed slot paper guides to the width of the paper that you are going to use.
4	Using both hands, put one sheet of paper or one transparency in the manual feed slot until the front edge touches the paper feed roller. When you feel the machine pull in the paper, let go.

Page Top

Printing on thick paper, bond paper, labels and envelopes

When the back output tray is pulled down, the machine has a straight paper path from the manual feed slot through to the back of the machine. Use this paper feed and output method when you want to print on thick paper, labels or envelopes.

Note

•	Remove each printed sheet or envelope immediately to prevent a paper jam.
•	The machine automatically turns on the Manual Feed mode when you put paper in the manual feed slot.

1	Open the back cover (back output tray).
2	Open the manual feed slot cover.
3	Using both hands, slide the manual feed slot paper guides to the width of the paper that you are going to use.
4	Using both hands, put one sheet of paper or one envelope in the manual feed slot until the front edge of the paper or envelope touches the paper feed roller. When you feel the machine pull in the paper, let go.

Note

•	Put the paper into the manual feed slot with the side to be printed face up.
•	Make sure that the paper or print media (see Acceptable paper and other print media.) is straight and in the correct position on the manual feed slot. If it is not, the paper or the transparency may not be fed properly, resulting in a skewed printout or a paper jam.
•	Do not put more than one sheet of paper in the manual feed slot at any one time, as it may cause a jam.
•	If you put any print media in the manual feed slot before the machine is in the Ready state, the print media may be ejected without being printed on.
•	To easily remove a small printout from the output tray, lift up the scanner cover by using both hands as shown in the illustration.
•	You can still use the machine while the scanner cover is up. To close the scanner cover, push it down with both hands.

Page Top