Copy options (temporary settings)

When you want to quickly change the copy settings temporarily for the next copy, use the temporary Copy keys. You can use different combinations.

The machine returns to its default settings one minute after copying, unless you have set the Mode Timer to 30 seconds or less. (See Mode timer.)

You can choose the following enlargement or reduction ratios:

*The factory setting is shown in Bold with an asterisk.

When set to Auto, the machine calculates the reduction ratio that best fits the paper size the paper tray set to. (See Paper size.)

Custom(25-400%) allows you to enter a ratio from 25% to 400% in 1% increments.

To enlarge or reduce the next copy follow the instructions below:

Make sure you are in Copy mode

Load your document.

Use the dial pad to enter the number of copies (up to 99).

Press Enlarge/Reduce.

Do one of the following:

•	Press or to choose the enlargement or reduction ratio you want. Press OK.
•	Press or to choose Custom(25-400%). Press OK. Use the dial pad to enter an enlargement or reduction ratio from 25% to 400%. (For example, press 5 3 to enter 53%.) Press OK.

Press Start.

Note

•	Page Layout Options 2 in 1(P), 2 in 1(L), 4 in 1(P) or 4 in 1(L) are not available with Enlarge/Reduce.
•	(P) means Portrait and (L) means Landscape.