This machine feature lets you use the Distinctive Ring subscriber service offered by some telephone companies, which allows you to have several telephone numbers on one phone line. Each phone number has its own Distinctive Ring pattern, so you will know which phone number is ringing. This is one way you can have a separate phone number for your machine.
Your machine has a Distinctive Ring function, allowing you to dedicate one phone number just for receiving faxes. You will need to set Distinctive Ring to On.

Note
| You can switch it off temporarily, then turn it back on. When you get a new fax number, make sure you reset this function. • | The machine will answer only calls to the Distinctive Ring number. |
|

Note
| After you have set the Distinctive Ring feature to On, the receive mode is set to Manual automatically. Unless you have a TAD or Voice Mail set up on the Distinctive Ring number, Manual mode means you must answer all the call yourself. You can not change the receive mode to the other mode while the Distinctive Ring is set to on. |
Registering the Distinctive Ring pattern
Very important!
After you have set the Distinctive Ring feature to ON, the receive mode is set to Manual automatically. Unless you have a TAD or Voice Mail set up on the Distinctive Ring number, Manual mode means you must answer all the calls yourself. You can not change the receive mode to another mode while the Distinctive Ring is set to on.
1 | Press Menu. |
2 | Press  or  to choose Fax. Press OK. |
3 | Press  or  to choose Miscellaneous. Press OK. |
4 | Press  or  to choose Distinctive. Press OK. |
5 | Press  or  to choose On. Press OK. |
6 | Press Stop/Exit. Distinctive Ring is now set to on. |
Turning off Distinctive Ring
1 | Press Menu. |
2 | Press  or  to choose Fax. Press OK. |
3 | Press  or  to choose Miscellaneous. Press OK. |
4 | Press  or  to choose Distinctive. Press OK. |
5 | Press  or  to choose Off. Press OK. |
6 | Press Stop/Exit. |

Note
| If you turn off Distinctive Ring, the machine will stay in Manual receive mode. You will need to set the Receive Mode again. (See Choosing the Receive Mode.) |