You can scan monochrome and colour documents into a memory card. Monochrome documents will be stored in PDF (*.PDF) or TIFF file formats (*.TIF). Colour documents may be stored in PDF (*.PDF) or JPEG (*.JPG) file formats. For colour documents the factory setting is 150 dpi Color and the default file format is PDF. The machine automatically creates file names based on the current date. (For details, see Quick Setup Guide.) For example, the fifth image scanned on July 1, 2006 would be named 01070605.PDF. You can change the colour, quality and file name.
Quality | Selectable File Format |
150 dpi Color | JPEG / PDF |
300 dpi Color | JPEG / PDF |
600 dpi Color | JPEG / PDF |
200x100 dpi B/W | TIFF / PDF |
200 dpi B/W | TIFF / PDF |
| 1 | Insert a CompactFlash®, Memory Stick®, Memory Stick Pro™, SecureDigital™, MultiMediaCard™ or xD-Picture Card™ into your machine.   WARNING | | Do not take out the memory card while PhotoCapture is blinking to avoid damaging the card or data stored on the card. |
|
| 2 | Load your document. |
| 3 | Press  ( Scan). |
| 4 | Press  or  to choose Scan to Card. Press OK. |
| 5 | Do one of the following. | • | To change the quality, go to step 6. | | • | Press Mono Start or Colour Start to start scanning without changing additional settings. |
|
| 6 | Press or to choose 150 dpi Color, 300 dpi Color, 600 dpi Color, 200x100 dpi B/W or 200 dpi B/W. Press OK. |
| 7 | Do one of the following. | • | To change the file type, go to step 8. | | • | Press Mono Start or Colour Start to start scanning without changing additional settings. |
|
| 8 | Press or to choose JPEG, PDF or TIFF. Press OK.  Note | • | If you chose colour in the resolution setting, you cannot choose TIFF. | | • | If you chose monochrome in the resolution setting, you cannot choose JPEG. |
|
| 9 | Do one of the following. | • | To change the file name, go to step 10. | | • | Press Mono Start or Colour Start to start scanning without changing additional settings. |
|
| 10 | The file name is set automatically however, you can set a name of your choice using the dial pad. You can only change the first 6 digits. Press OK. Note | | Press Clear/Back to delete the current name. |
|
| 11 | Press Mono Start or Colour Start. |
